Abstract:The off-axis embedment behaviors of unidirectional and multidirectional laminated engineered bamboo panels used for glued-laminated bamboo (glubam) structures under dowel-type bolts with three different diameters, 12, 14, and 16 mm, were experimentally studied in this research. The half-hole loading method given by current standards was adopted to perform the embedment tests. Seven different off-axis loading directions from 0 degrees to 90 degrees related to the main bamboo fiber direction at an interval of 15 degrees in the panel plane were considered. The different failure patterns, stress-displacement curves, and the corresponding full-field surface strain measured through the digital image correlation (DIC) method are reported. The loading angles significantly influenced the embedment performance of unidirectional bamboo panel specimens, and the strength values decreased with the increasing off-axis loading angles. A difference of 35% in the strength values between 0 degrees and 90 degrees loading specimens was observed. However, quasi-isotropic embedment properties were noticed for the multidirectional laminated engineered bamboo panels. The capacity functions were provided to predict the mean off-axis embedment strength and characteristic strength values by inputting the characteristic density values into the functions. Compared with the characteristic strength values estimated through the statistical method, with a 95% probability of exceedance and 75% significant level, the conventional capacity-function method underestimated the off-axis embedment strength values, and thus may leading to an overconservative design. The statistical characteristic embedment strength values are suggested to be used to calibrate the safety factor of capacity equations given by wood standards. Results from this research can be used to predict the ultimate strength of glubam joints under complex loading conditions and obtain reliable design values for engineering applications.

Anisotropic Bilinear Flexural Behavior and Failure Mechanism of Parallel Bamboo Strand Lumber Plates

Flexural Performances and Failure Analyses of Parallel Bamboo Strand Lumber Plates

Anisotropic Mechanical Properties and Composite Model of Parallel Bamboo Strand Lumbers

Flexural Failure Mechanism of Bamboo Composite Plates with Different Construction Technologies and Tectonic Patterns

First-order Anisotropic Beam Model and Failure Criterion for Flexural Parallel Bamboo Strand Lumbers

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Impact Bending Behaviors of Parallel Bamboo Strand Lumber Beams: Velocity Sensitivity and Anisotropy

Flexural Fatigue Study of Glubam Beams

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Anisotropy Attenuation of Reconstituted Bamboo Lumber by Orthogonal Layup Process

Slenderness Ratio Effect on Eccentric Compression Properties of Parallel Bamboo Strand Lumber Columns

A more explosion-resistant bamboo fiber reinforced composite structure through balancing bamboo anisotropy

Size Design and Nonlinear Stress-Strain Relationship of Parallel Bamboo Strand Lumbers in Tension and Compression

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Close-in Explosion Performances and Damage Evaluation of Bamboo Fiber Reinforced Laminates

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Post-buckling Behavior of Rectangular Multilayer FG-GPLRC Plate with Initial Geometric Defects Subjected to Non-Uniform In-Plane Compression Loads in Thermal Environment

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Comparative investigation on beam-to-beam connection with different types of connecting plates

Laminated bamboo materials for plated building structures

The flexural performance of vertical steel-plate-reinforced bamboo scrimber beams