Abstract:The widely used fin-and-tube heat exchangers have a low air-side heat transfer capacity. Enhancing the air-side thermo-hydraulic performance is a key point of the relevant research. Vortex generators have been proven to be one of the most promising techniques to improve the air-side heat transfer capacity of the fin-and-tube heat exchangers. Herein, this paper proposed an original sinusoidal wavy winglet type vortex generator to achieve high heat transfer performance with moderate increased pressure drop penalty. A three-dimensional numerical simulation was conducted to explore the air-side thermo-hydraulic performance with Reynolds number ranging from 1027 to 2054. The longitudinal vortex is generated in the channel so as to enhance the intensify of convective heat transfer. Especially, the wave-shaped vortex generators can produce many local small-scale secondary flows. And it is confirmed that the frontal area of the vortex generator can be effectively extended by such wavy shape and a more intensified disturbance can be caused in the air-side. Furthermore, the effects of the attack angle (α), dimensionless height (Hp) and especially arrange position of the vortex generator were investigated. Additionally, the ranges of the Nusselt number ratio, friction factor ratio and surafece goodness factor in this study are 1.09–1.52, 1.09–2.31, and 1.06–1.24, respectively. Moreover, it is also very crucial to evalute the grade of energy and to explore the irreversible loss druing the heat tranfer process in view of the second law of thermodynamics. And the thermal dissipation can be reduced by up to 5.85% compared with the plain fins from the perspective of exergy analysis.

Field Synergy Analysis of Heat Transfer Enhancement on Slit Wavy Fins

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Numerical study and experimental verification of transverse direction type serrated fins and field synergy principle analysis

Detailed Heat Transfer Measurements of Curved Fin Channels

Field Synergy Analysis on Convective Heat Transfer and Fluid Flow of a Novel Triangular Perforated Fin

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Numerical simulation of slit fin cell's flow and heat transfer

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Application of Field Synergy Principle for Fin Reshaping of a Natural Convection Radiator

Forced Heat Convection of Wavy Fin Channel

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number

Heat transfer and pressure drop characteristic research of sine wavy flying-wing fins

Analysis of Heat Transfer and Flow Characteristics over Serrated Fins with Different Flow Directions

Study on the efficient heat transfer mechanism of microchannel pin-fin arrays under low pumping power

Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips

On the Heat Transfer Enhancement of Plate Fin Heat Exchanger

Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Heat Transfer Enhancement of Microchannel Heat Sink Using Sine Curve Fins

Numerical analysis on heat transfer enhancement of wavy fin-tube heat exchangers for air-conditioning applications

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger