Abstract:Wavy fins have been considered as an alternative of the straight fins in compact heat exchangers (CHEs) for better heat transfer performance, which can be augmented by considering vortex generators (VGs). This work is related to numerical investigation and optimization of corrugation height of fin and angle of attack of delta winglet type VGs in a wavy fin-and-tube heat exchanger. For this purpose, three-dimensional (3D) Reynolds-averaged Navier-Stokes analysis and a multi-objective genetic algorithm (MOGA) with surrogate modeling are performed. Numerical simulation is carried out to study the effect of delta winglets with varying the corrugation height of wavy fin in three rows of tubes with staggered tube arrangements. The corrugation height (H) and angle of attack (alpha) vary from 0.3 mm to 1.8 mm and 15 deg to 75 deg, respectively. Results are illustrated by investigating the flow structures and temperature contours. Results show that increasing the corrugation height of wavy fin and angle of attack of delta winglets enhances the heat transfer performance of heat exchanger while friction factor is also increased. Employing delta winglets has augmented the thermal performance for all corrugation heights and superior effect is observed at a higher corrugation. To achieve a maximum heat transfer enhancement and a minimum pressure drop, the optimal values of these parameters (H and alpha) are calculated using the Pareto optimal strategy. For this purpose, computational fluid dynamics (CFD) data, a surrogate model (neural network), and a multi-objective GA are combined. Results show that optimal orientation of delta winglets with respect to corrugation height can improve both the thermal and hydraulic performance of the heat exchanger.

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Numerical auxiliary study of charge-air cooler design

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

On the Heat Transfer Enhancement of Plate Fin Heat Exchanger

Single- and multi-objective optimization of a plate-fin heat exchanger with offset strip fins adopting the genetic algorithm

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Experimental and Numerical Optimization Study on an Airfoil-Shaped Heat Exchanger

Numerical Study And Optimization Of Corrugation Height And Angle Of Attack Of Vortex Generator In The Wavy Fin-And-Tube Heat Exchanger

A Comprehensive Empirical Correlation for Finned Heat Exchangers with Parallel Plates Working in Oscillating Flow

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Structural parameter design of welded plate heat exchanger based on multi-objective optimization algorithm

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

An Experimental Study on the Offset-Strip Fin Geometry Optimization of a Plate-Fin Heat Exchanger Based on the Heat Current Model

Study on Heat Transfer Synergy and Optimization of Capsule-Type Plate Heat Exchangers

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment