Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment

Numerical study on flow and heat transfer characteristics of a novel centrosymmetric tube with bent inner fins based on experiment

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method

Numerical simulation of flow and heat transfer performance of tube-shell coupled helically coiled corrugated tube heat exchanger

Optimization of H-type finned tube heat exchangers with combinations of longitudinal vortex generator, dimples/protrusions and grooves by Taguchi method

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Experimental and Numerical Investigations on Thermal-Hydraulic Performance of Three-Dimensional Overall Jagged Internal Finned Tubes

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Experimental and numerical simulation study of a novel double shell-passes multi-layer helically coiled tubes heat exchanger

Parameters Optimization of Fin-and-Tube Heat Exchanger with a Novel Vortex Generator Fin by Taguchi Method

Thermo-fluid dynamic design optimization of a concentric tube heat exchanger

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Innovative simplified approach and numerical investigation for flow and heat transfer in internally threaded tubes

Optimized design of Helical-Finned Double Pipe heat exchangers via numerical simulation and Artificial Intelligence

CFD-based structure optimization of plate bundle in plate-fin heat exchanger considering flow and heat transfer performance

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter