Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Thermo-fluid dynamic design optimization of a concentric tube heat exchanger

Globally Optimal Design of Intensified Shell and Tube Heat Exchangers Using Complete Set Trimming

Thermohydraulic Performance Optimization of Integrated Porous Pin Fins in Microchannel Heat Sink Using Shape Optimization Coupled with NSGA

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Enhancing heat transfer efficiency in corrugated tube heat exchangers: A comprehensive approach through structural optimization and field synergy analysis

Shape and Layout Optimization of Bare-Tube Heat Exchangers Using the Adjoint Method and CAD-based Parametrization

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Variable-dimension optimization study and design of internally finned helically coiled tubes heat exchangers based on numerical simulation and experiment

Numerical Investigation and Optimization on Shell Side Performance of A Shell and Tube Heat Exchanger with Inclined Trefoil-Hole Baffles

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study

Natural convective heat transfer analysis of a vertical tapered inner annulus tube with dual inverted frusto-conical turbulator using CFD

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

Topology optimization of two fluid heat exchangers

Optimized shape design and thermal characteristics investigation of helically coiled tube type heat exchanger

Investigation of heat transfer Exergy loss number and its application in optimization for the shell and helically coiled tube heat exchanger

Numerical Investigation on the Optimum Thermal Design of the Shape and Geometric Parameters of Microchannel Heat Exchangers with Cavities

Optimized Design of Shell and Tube Heat Exchanger with Segmental Baffles

Characterization of internal thermohydraulic flow and heat transfer improvement in a three‐dimensional circular corrugated tube surfaces based on numerical simulation and design of experiment

Optimization of the Design of Shell and Double Concentric Tube Heat Exchanger using the Jaya Algorithm