Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Single- and multi-objective optimization of a plate-fin heat exchanger with offset strip fins adopting the genetic algorithm

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Optimal Design of Plate-Fin Heat Exchanger by Combining Multi-Objective Algorithms

Multi-Objective Finned-Tube Heat Exchanger Optimization Using a Genetic Algorithm

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Comprehensive performance investigation and optimization of a plate fin heat exchanger with wavy fins

Experimental and Numerical Optimization Study on an Airfoil-Shaped Heat Exchanger

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Optimization Analysis of Thermodynamic Characteristics of Serrated Plate-Fin Heat Exchanger

Optimal Design Approach for the Plate-Fin Heat Exchangers Using Neural Networks Cooperated with Genetic Algorithms

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

A Framework for Multi-Objective Optimization of Plate-Fin Heat Exchangers Using a Detailed Three-Dimensional Simulation Model

Thermal-economic optimization design of shell and tube heat exchanger using an improved sparrow search algorithm

Passage arrangement design for multi-stream plate-fin heat exchanger under multiple operating conditions

Performance Analysis and Multi-Objective Optimization of an Offset Plate-Fin Crossflow Heat Exchanger

Thermal-Economic Optimization of Plate–Fin Heat Exchanger Using Improved Gaussian Quantum-Behaved Particle Swarm Algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Multi-objective optimization and sensitivity analysis of offset strip fin compact heat exchangers

A simultaneous optimization of a flexible heat exchanger network under uncertain conditions

Design Optimization of Plate-Fin Heat Exchanger in a Gas Turbine and Supercritical Carbon Dioxide Combined Cycle with Thermal Oil Loop

Exergy Efficiency Design For Multi-Stream Plate-Fin Heat Exchangers Based On Entropy Generation Assessment