Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Parametric optimization of a spiral ground heat exchanger by response surface methodology and multi-objective genetic algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Multi-objective optimization of helically coiled tube heat exchanger based on entropy generation theory

Numerical Investigation on the Multi-Objective Optimization of a Shell-and-tube Heat Exchanger with Helical Baffles

Multi-objective Optimization of Helical Coil Steam Generator in High Temperature Gas Reactors with Genetic Algorithm and Response Surface Method

Intelligent optimization design of shell and helically coiled tube heat exchanger based on genetic algorithm

Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction

Application of Response Surface Method and Multi-Objective Genetic Algorithm to Configuration Optimization of Shell-and-tube Heat Exchanger with Fold Helical Baffles

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Optimization investigation on configuration parameters of spiral-wound heat exchanger using Genetic Aggregation response surface and Multi-Objective Genetic Algorithm

Multi-Objective Finned-Tube Heat Exchanger Optimization Using a Genetic Algorithm

Experimental investigation and multi-objective optimization of a novel multi-fluid heat exchanger performances using response surface methodology and genetic algorithm

Single- and multi-objective optimization of a plate-fin heat exchanger with offset strip fins adopting the genetic algorithm

Multi-objective Shape Optimization of a Heat Exchanger Tube Fitted with Compound Inserts

Multi-objective optimization on shell-side performance of rod-baffle heat exchangers with twisted oval tubes

Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses

Optimizing the size of a printed circuit heat exchanger by multi-objective genetic algorithm

Energy and Cost Optimization of Shell and Tube Heat Exchanger with Helical Baffles Using Kriging Metamodel Based on MOGA

Single/Multi-Objective Optimization Design and Numerical Studies for Lead-to-Supercritical Carbon Dioxide Heat Exchanger Based on Genetic Algorithm