Abstract:The comprehensive performance of sine wavy fin in plate-fin heat exchangers (PFHEs) is numerically studied based on fluid structure interaction (FSI) analysis in this paper. The analysis results of stress distribution reveal that the highest stress is located in the inlet and outlet region of fin structure, and the fluctuant stress reaches to the peak in the wave crest. By way of analyzing Full 2nd-Order Polynomial response surface (RS), the effects of inlet velocity and five configuration parameters (fin height, fin space, fin thickness, fin wavelength and double amplitude) on heat transfer, flow resistance and stress of sine wavy fin structure are quantitatively assessed. The results reveal that the j factor increases with the increase of fin space and fin height, and decreases with the increase of fin thickness, wavelength and inlet velocity. The j factor firstly increases with the increase of double amplitude and then decreases. The f factor increases with double amplitude, fin space and fin height, and decreases with fin thickness, wavelength and inlet velocity. The maximum stress increases with the increase of wavelength and fin space, and decreases with the increase of fin thickness and double amplitude. The interaction effects of input parameters on the j factor and f factor are not obvious. While the interaction effects of fin thickness and wavelength, double amplitude and wavelength on the maximum stress are obvious. Based on RS, Multi-objective Genetic Algorithm (MOGA) is performed to optimize the fin structure comprehensively, with multiple objectives of increasing the JF factor (JF = j/f(1/3)) and decreasing the maximum stress to the best. The optimization results shows that, compared with the original design, the JF factor of optimal design 1, 2, and 3 increases by 11.0%, 8.4% and 15.9% respectively, and the maximum stress decreases by 32.3%, 42.4% and 20.7% respectively. (C) 2018 Elsevier Ltd. All rights reserved.

Heat transfer and pressure drop characteristic research of sine wavy flying-wing fins

Correlation Development and Parametric Investigation for Thermal–hydraulic Characteristics of Flying-Wing Fin

Study on Thermo-Hydraulic Performance and Correlation Development of the Interrupted Flying-Wing Fins

Optimization Investigation on Configuration Parameters of Sine Wavy Fin in Plate-Fin Heat Exchanger Based on Fluid Structure Interaction Analysis

Flow and Heat Transfer on Compact Smooth Fin Surfaces

Numerical Design of an Efficient Wavy Fin Surface Based on the Local Heat Transfer Coefficient Study

Experimental Study on Heat Transfer and Flow Resistance Characteristics of Louver Fins

Computational analysis of heat transfer and pressure drop performance for internally finned tubes with three different longitudinal wavy fins

Air-side flow and heat transfer characteristics research and empirical correlations of wavy fins in negative gauge pressure environment

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Field Synergy Analysis of Heat Transfer Enhancement on Slit Wavy Fins

Experimental and numerical studies on heat transfer enhancement for air conditioner condensers using a wavy fin with a rectangular winglet

3D Numerical Simulation of the Air Flow Among the Multi-louvered Fins

Numerical study on performance and fin efficiency of wavy fin-and-tube heat exchangers

Experimental and Numerical Study and Comparison of Performance for Wavy Fin and a Plain Fin with Radiantly Arranged Winglets Around Each Tube in Fin-and-tube Heat Exchangers

Thermal-hydraulic performance and optimization of attack angle of delta winglets in plain and wavy finned-tube heat exchangers

Numerical investigation of heat transfer and flow resistance characteristics of interpenetrated flying-wing finned tubes

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Numerical analysis and optimization on flow and heat transfer performance of HPD‐type perforated fins