Abstract:In the field of military and aerospace, there are strict requirements for cryocoolers, such as high efficiency, compactness, light weight, high reliability, long life and low vibration limits. At present, most mechanical cryocoolers which can be applied in space are Stirling cryocoolers and Stirling type pulse tube cryocoolers. Two-stage cryocoolers are sought-after for aerospace applications, since the performance of single-stage cryocoolers is limited below 35 K, especially at 20 K. Compared with two-stage Stirling cryocoolers, Stirling/pulse tube hybrid cryocoolers eliminate the moving parts of the second stage, which leads to longer life. Moreover, hybrid cryocoolers can achieve higher pressure ratios and efficiency in their regenerator due to a better match in charging pressure between stages. In this study, we designed a two-stage Stirling/pulse tube hybrid cryocooler at 20 K with low temperature inertance tubes and a surge volume to adjust the phase difference. We simulated the performance of the designed cryocooler using the Sage code, and proved that the as-designed cryocooler can provide 0.54 W cooling power at 20 K with 180 W electrical power input. In addition, the effects of the phase difference, mass flow, and pressure ratio in the displacer are also discussed.

Design and experiments for low vibration and a high capacity pneumatically driven split-Stirling cryocooler

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

Improvement of a Stirling type two-stage pulse tube cryocooler

Development of a two-stage pulse tube Stirling cryocooler

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

Development of a Linear Compressor for Two-Stage Pulse Tube Cryocoolers

Cool Down Time Optimization of the Stirling Cooler

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Research and development of Stirling cryogenic refrigerator

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Study on A Pneumatically Driven Split Stirling Cryocooler Operating above 100 Hz

Design on a Two-tage Stirling / Pulse TubeS

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

Study on A 5.0 W/80 K Single Stage Stirling Type Pulse Tube Cryocooler

Thermodynamic characteristics of a single-stage stirling-type pulse tube cryocooler capable of 1220 W at 77 K with two cold fingers driven by one linear compressor

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

A miniature Stirling cryocooler operating above 100 Hz down to liquid nitrogen temperature

The Study on a Gas-Coupled Two-Stage Stirling-Type Pulse Tube Cryocooler

A Single-Stage Stirling-type Pulse Tube Cryocooler Achieving 1080 W at 77 K with Four Cold Fingers Driven by One Linear Compressor