Abstract:Biocompatible titanium (Ti) is commonly used as an implant material. Hydroxyapatite (HAp, Ca 10 (PO 4 ) 6 (OH) 2 ) is a biomaterial that is similarly applied in the medical field owing to its biocompatibility. HAp is used as an alternative material for bones and teeth; for such purpose, the pores should have diameters of at least 200 μm. However, no studies have reported porous Ti-doped HAp. In this study, we fabricated five types of porous Ti-doped HAp ceramics using different amounts of 30% titanium sulfate solution (0.1, 0.2, 0.3, 0.4, and 0.5 g) as additive Ti ions in the chemical route. In general, the lattice parameters of Ti-doped HAp decrease because Ti ions are substituted for Ca ions but have a smaller ionic radius. However, the lattice parameters a and c actually increased in the porous Ti-doped HAp ceramics produced in this study, and only decreased in sample fabricated with 0.5 g of Ti solution. This change in structure was attributed to dehydroxylation of OH ions from the HAp lattice. Ti ions inserted into OH channels parallel to the c -axis in HAp lattices generate O–Ti–O bonds. Consequently, the lattice parameter c increased. The interaction between the dislocated OH ions and protonated HPO 4 ions in the HAp lattices increased the lattice parameter a . The formation of O–Ti–O bonds did not maintain the charge balance, owing to the tetravalent Ti ions. However, the development of the c -plane in the HAp lattices increased as the amount of added Ti increased. Consequently, the growth of the negatively charged c -plane maintained the charge balance by compensating for the extra charges of the Ti ions.

Effect of titanium addition on phase stability and grain size of hydroxyapatite

Effect of Supersaturation on the Morphology of Hydroxyapatite Crystals Deposited by Electrochemical Deposition on Titanium

Hydrothermal synthesis of nano-hydroxyapatite crystals

Preparation of Nanocrystals Hydroxyapatite/tio2 Compound by Hydrothermal Treatment

Effect of La-Introduced Manner on the Phase Formation and Morphology of the Hydrothermally Synthesized Pb_(0.70)La_(0.30)TiO_3 Powders

Influence of titanium ion doping on structural changes in porous hydroxyapatite ceramics

Controllable Synthesis of Different Size Hydroxyapatite Nanoparticles and Their Biological Effects on Osteoblast-Like Cells

Mechanical Grinding of Hydroxyapatite and Its Interaction with Titanium

Preparation and characterization of a titanium-substituted hydroxyapatite photocatalyst

Impact of physical and chemical parameters on the hydroxyapatite nanopowder synthesized by chemical precipitation method

One-step Modification of Nano-Hydroxyapatite Coating on Titanium Surface by Hydrothermal Method

Controllable Growth of Tio2 Nanopowders by Hydrothermal Synthesis Method

Morphology and phase composition of plasma melted titanium+hydroxyapatite mixed powder

Effect of Ultrasound Irradiation on the Synthesis of Hydroxyapatite/Titanium Oxide Nanocomposites

Hydroxyapatite precipitation on Ti by microarc oxidation and hydrothermal treatment

Influence of Ca concentration in electrolyte and hydrothermal conditions on the morphology and composition of the TiO2/hydroxyapatite composite layer by microarc oxidation

Preparation and crystallization control of nanoparticle hydroxyapatite

Synthesis and Properties of Hydroxyapatite-Containing Porous Titania Coating on Ultrafine-Grained Titanium by Micro-Arc Oxidation

The Effect of Morphology and Alkli-Heated Treatment on the Apatite Formation Ability of Titanium Surfaces Soaked in DMEM Medium

Wet Synthesis and Characterization of Lanthanum-Substituted Hydroxyapatite

Study on surface bio-activation of powder metallurgy porous titanium