Abstract:For dental/orthopedic implants to achieve better bone apposition and bone-implant bonding, various approaches to improve titanium surfaces have been developed. Recently, a fluoridated hydroxyapatite (FHA) coating on titanium (Ti) implants was made by sol–gel method and shown to be a possible applicative bone implant. The purpose of the current study was to evaluate biological responses and biomechanical bonding strength of FHA coated Ti implants as compared with that of the conventional Ti alloys and hydroxyapatite (HA) coated Ti implants. In vitro assays were made using human osteoblast-like cell (MG63) culture on different implants with cell attachment, morphology and differentiation evaluations. The implant plates were also implanted into the proximal metaphysis of New Zealand White rabbit tibiae. After 8 and 16 weeks implantation, mechanical and histological assessments were performed to evaluate biomechanical and biological behavior in vivo. The results showed that the cell adhesion and cell growth rate on the FHA and HA surface was higher than that on cp Ti surface (p<0.01), and insignificant difference was observed between two coated groups. Mechanical test demonstrated that the FHA implants had a higher interface shear strength than the both controls at 8 and 16 wks, with no significant difference with HA-Ti. Histologically, the coated implants revealed a significantly greater percentage of bone-implant contact when compared with the uncoated implants. Results demonstrated that the new FHA surface improved cell adhesion and proliferation. The coating exhibited a bioactive mechanical and histological behavior at bone-implant interface, suggesting that a useful approach by combined coating processes could optimize implant surfaces for bone deposition and early implant fixation.

Hydrothermal treatment of Ti surface to enhance the formation of low crystalline hydroxyl carbonate apatite

One-step Modification of Nano-Hydroxyapatite Coating on Titanium Surface by Hydrothermal Method

Preparation and biological evaluation of Nano-HA coating on tatinium surfaces

Ion beam treatment of titanium surfaces for enhancing deposition of hydroxyapatite from solution

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

Preparation of Hierarchical Porous Structure on Ti Surface and Bioactivity

Osteoblast Responses to Thin Nanohydroxyapatite Coated on Roughened Titanium Surfaces Deposited by an Electrochemical Process.

Surface modification of TiTa alloy by hydrothermal-precalcification treatment and its excellent apatite-forming inductivity

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Biomimetic Deposition of Hydroxyapatite by Mixed Acid Treatment of Titanium Surfaces

TEM Analysis and in Vitro and in Vivo Biological Performance of the Hydroxyapatite Crystals Rapidly Formed on the Modified Microarc Oxidation Coating Using Microwave Hydrothermal Technique

Impact of post-heat-treatment on the surface-roughness, residual stresses, and micromorphology characteristics of plasma-sprayed pure hydroxyapatite and 7%-Aloxite reinforced hydroxyapatite coatings deposited on titanium alloy-based biomedical implants

Hydrothermal Growth of TiO2-CaP Nano-Films on a Ti–Nb-based Alloy in Concentrated Calcium Phosphate Solutions

Nano-hydroxyapatite Crystal Formation Based on Calcified TiO2 Nanotube Arrays

Direct growth of structurally controllable hydroxyapatite coating on Ti-6Al-4V through a rapid hydrothermal synthesis

Surface modification of TiNb alloys by hydrothermal–precalcification treatment and its excellent in vitro osteogenic bioactivity

Effect of Bioactivity of Surface Topography and Coating Forming by Infrared Light-Induced on Titanium for Bone Repair

Bioactive Performances of Surface Modification of Ti–6Al–4V Jointly Using Ultrasonic‐Assisted Microarc Oxidation and Hydrothermal Treatment

In Situ Modulation of Crystallinity and Nano-Structures to Enhance the Stability and Osseointegration of Hydroxyapatite Coatings on Ti-6Al-4V Implants

Characterization and Preosteoblastic Behavior of Hydroxyapatite-Deposited Nanotube Surface of Titanium Prepared by Anodization Coupled with Alternative Immersion Method.

In Vitro Evaluation of Biologically Derived Hydroxyapatite Coatings Manufactured by High Velocity Suspension Spraying