Abstract:In the present work, a regular grade GO sheet was produced successively by strip casting, hot rolling, normalizing annealing, two-stage cold rolling with intermediate annealing, primary recrystallization annealing, secondary recrystallization annealing and purification. The aim of this paper was to characterize the evolution of microstructure, texture and inhibitor along the new processing route by comprehensive utilization of optical microscopy, X-ray diffraction and transmission electron microscopy. It was found that a fine microstructure with the ferrite grain size range of 7–12μm could be obtained in the primary recrystallization annealed sheet though a very coarse microstructure was produced in the initial as-cast strip. The main finding was that the “texture memory” effect on Goss texture started on the through-thickness intermediate annealed strip after first cold rolling, which was not similar to the “texture memory” effect on Goss texture starting on the surface layers of the hot rolled strip in the conventional production route. As a result, the origin of Goss nuclei capable of secondary recrystallization lied in the grains already presented in Goss orientation in the intermediate annealed strip after first cold rolling. Another finding was that fine and dispersive inhibitors (mainly AlN) were easy to be produced in the primary recrystallization microstructure due to the initial rapid solidification during strip casting and the subsequent rapid cooling, and the very high temperature reheating usually used before hot rolling in the conventional production route could be avoided.

Microstructure and Texture Evolution of Non-oriented Electrical Steel 50W600 during Processing

Microstructure and texture evolution of non-oriented electrical steel 50 W470

Microstructure and Texture Development in a Thin Gauge Non Oriented Electrical Steel

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Texture evolution in grain-oriented electrical steel during hot band annealing and cold rolling

Microstructure, texture and magnetic properties of the semi-processed strip-cast non-oriented electrical steel

Evolution of Texture in High Permeability Grain Oriented Silicon Steel Produced by Casting Thin Slab and Rolling Process

Microstructure and texture evolution of ultra-thin high grade non-oriented silicon steel used in new energy vehicle

The Early Stage Formation of Shear Orientations and the Stability of //ND Orientations During Hot Rolling in Electrical Steels

Development of microstructure and texture in strip casting grain oriented silicon steel

Microstructure and texture evolution of strip casting 3 wt% Si non-oriented silicon steel with columnar structure

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250

Microstructure and Texture Evolution in Cold-Rolled and Annealed Oxygen-Free Copper Sheets

TEXTURE DISTRIBUTION AND DEVELOPMENT THROUGH THE THICKNESS AFTER CROSS SHEAR ROLLING OF GRAIN ORIENTED SILICON STEEL

EFFECT OF COLD ROLLING PROCESS ON TEXTURE EVOLUTION OF GRADIENT MICROSTRUCTURE IN Fe-3,0 % Si NON-ORIENTED SILICON STEEL

Characterization of microstructure, texture and magnetic properties in twin-roll casting high silicon non-oriented electrical steel

Microstructural Characterization of Non-Oriented Low Silicon Steel Produced by Compact Strip Production

Microstructure and Texture Evolution of Cold Rolled 1070 Al Alloy During the Subsequent Annealing Treatment

Ultrastrong {100} texture in twin-roll strip cast non-oriented electrical steel through two-step annealing

Evolution of microstructure, texture and inhibitor along the processing route for grain-oriented electrical steels using strip casting

Effects by the microstructure after hot and cold rolling on the texture and grain size after final annealing of ferritic non-oriented FeSi electrical steel