Abstract:This study focuses on the microstructure evolution of non-oriented silicon steel for the drive motor iron core of new energy vehicles. The Fe-3.0% Si non-oriented silicon steel hot-rolled bands were taken as the research objects and were normalized at 700, 800 and 900 °C for 3 and 10 min. The influence of low-temperature normalization process on the microstructure, texture and mechanical properties was studied. The results show that the bands normalized at 700 and 800 °C inherit the gradient microstructure and texture characteristics of the initial hot-rolled band. The surface layer consists of homogeneous and fine recrystallized grains, the central layer consists of elongated deformed grains with γ-fiber and α-fiber textures and the subsurface layer has mixed grain structure with strong Goss texture. When the normalizing temperature is increased to 900 °C, the normalized band is completely recrystallized, and the gradient structure and texture are significantly weakened. During the normalizing process, the θ-fiber oriented grains in the subsurface mainly nucleate at the grain boundaries of the α*-fiber and //ND matrix grains, and the //ND oriented grains mainly nucleate at the grain boundaries of Goss and {110} deformed matrix grains. The θ-fiber oriented grains in the central layer mainly nucleate at the grain boundaries of {001} , γ-fiber and {114} matrix grains, the α-fiber oriented grains nucleate in the {111} and α-fiber deformed matrix grains, the nucleation of α*-fiber grains is related to the α-fiber deformed matrix grains. After normalizing at 900 °C, θ-fiber and α*-fiber grains have growth advantages, resulting in strong θ-fiber and α*-fiber textures. As the normalizing temperature increases, the gradient structure of the normalized microstructure is gradually weakened, thus leading to the decrease in plastic deformation ability.

Microstructure and texture evolution of ultra-thin high grade non-oriented silicon steel used in new energy vehicle

EFFECT OF COLD ROLLING PROCESS ON TEXTURE EVOLUTION OF GRADIENT MICROSTRUCTURE IN Fe-3,0 % Si NON-ORIENTED SILICON STEEL

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}

Microstructure and texture evolution of ultra-thin grain-oriented silicon steel sheet fabricated using strip casting and three-stage cold rolling method

Evolution of Texture in High Permeability Grain Oriented Silicon Steel Produced by Casting Thin Slab and Rolling Process

Development of microstructure and texture in strip casting grain oriented silicon steel

Microstructure and Texture Evolution of Strip-Cast and Hot-Rolled Fe-3 %si Steel Sheet

Experimental investigation and simulation of crystallographic orientations evolution in a cold-rolled ultra-thin grain-oriented silicon steel

Investigation of microstructure and texture as related to primary recrystallization of grain-oriented silicon steel

Microstructure and texture evolution of strip casting 3 wt% Si non-oriented silicon steel with columnar structure

Significant effect of as-cast microstructure on texture evolution and magnetic properties of strip cast non-oriented silicon steel

Effects of Two-Stage Cold Rolling Schedule on Microstructure and Texture Evolution of Strip Casting Grain-Oriented Silicon Steel with Extra-Low Carbon

Microstructure and texture evolution of thin-gauge non-oriented silicon steel with high permeability produced by twin-roll strip casting

Study on microstructure and texture of a new-type low Si high Mn non-oriented silicon steel 50W250

Electron Backscatter Diffraction Analysis of Low-Misorientation-Angle Boundary and High-Energy Boundary in the Hot-Rolled Plate of Grain-Orientated Silicon Steel

Ultrastrong {100} texture in twin-roll strip cast non-oriented electrical steel through two-step annealing

Effect of recovery annealing prior to recrystallization annealing on the texture evolution of a 3.3% silicon steel

The origin of {113} grains and their impact on secondary recrystallization in producing ultra-thin grain-oriented electrical steel

Effect of Normalizing Treatment on Microstructure and Mechanical Properties of Non-oriented Fe-3.0% Si Steel

Evolution of {0kl} 〈1 0 0〉 texture and microstructure in preparation of ultra-thin grain-oriented silicon steel