Abstract:In order to study the underground coal-gasification process, Aspen Plus software was used to simulate the lignite underground gasification process, and a variety of unit operation modules were selected and combined with the kinetic equations of coal underground gasification. The model can reflect the complete gasification process of the coal underground gasifier well, and the simulation results are more in line with the experimental results of the lignite underground gasification model test. The changes in the temperature and pressure of oxygen, gasification water, spray water, and syngas in pipelines were studied, and the effects of pipe diameters on pipeline conveying performance were investigated as well. The effects of the oxygen/water ratio, processing capacity, and spray-water volume on the components of syngas and components in different reaction zones were studied. In addition, the change tendency of gasification products under different conditions was researched. The results indicate that: (1) The depth of injection and the formation pressure at that depth need to be taken into account to determine a reasonable injection pressure. (2) The liquid-water injection process should select a lower injection pressure. (3) Increasing the oxygen/water ratio favors H2 production and decreasing the oxygen/water ratio favors CH4 production. (4) The content of CO2 is the highest in the oxidation zone, the lowest in the reduction zone, and then increases a little in the methanation reaction zone for the transform reaction. The content of CO is the lowest in the oxidation zone and the highest in the reduction zone. In the methanation reaction zone, CO partially converts into H2 and CO2, and the content of CO is reduced. (5) The injection of spray water does not affect the components of the gas but will increase the water vapor content in the gas; thus, this changes the molar fraction of the wet gas.

Pressure drop simulation of adiabatic fixed bed methanation reactor

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Modeling and Simulation of Commercial Catalytic Reformers

Simulation and analysis of coal based syngas methanation process based on Aspen Plus

Analysis of Process Control Performance for an Industrial Demethanizer Based on Dynamic Simulation

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Simulation of Underground Coal-Gasification Process Using Aspen Plus

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor

Aspen Simulation Study of Dual-Fluidized Bed Biomass Gasification

Simulation and Analysis of Fixed-Bed Reactor for Hydrochlorination of Acetylene

Development of methanation reactor and related process technology

Simulation of Municipal Solid Waste Gasification in Two Different Types of Fixed Bed Reactors

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Numerical Investigation on Methanation Kinetic and Flow Behavior in Full-Loop Fluidized Bed Reactor

Pressure Drop Profiles in a Flow Reversal Reactor for the Catalytic Combustion