Abstract:The revival of CO2 methanation (Sabatier reaction) as part of the large-scale Power-to-Gas technology has stimulated the development of novel reactor concepts for better heat management due to its exothermic nature. The generation of hot-spots in fixed bed reactors could reduce methane yield, accelerate catalyst deactivation, and potentially cause thermal runaway. However, hot-spots could be utilized to achieve outstanding CO2 methanation performance at low temperatures and high gas flow rate in monolithic reactors, whereas strategic bed packing configurations could boost the performance of low-activity catalytic beds. We prepared NiFe catalysts derived from in-situ grown layered double hydroxides via urea hydrolysis on washcoated cordierite honeycomb substrate with varying activities. Temperature profiles by both experimental and computational fluid dynamic (CFD) studies revealed hot-spot formation along catalytic beds. Hot-spots increased the catalytic beds' temperature due to high thermal conductivity of cordierite monolith, thus accelerated the reaction. The monolithic reactor with a single-monolith bed exhibited a methane yield of 16.5% at 250 degrees C, which was significantly increased to 80.4% on the reactor with three-monolith bed of the same catalyst at similar reaction condition with a constant ratio of catalyst mass to gas flow rate. A combined low-high activity monolithic bed was proposed which demonstrated high methane yield and excellent stability. Interestingly, the methane yields were higher at a gas flow rate of 1500 mL/min than that at 500 mL/min, again ascribed to the beneficial effect of hot-spot formation on monolithic reactors. Therefore, strategic bed packing configuration plays an important role in the optimization of monolithic methanation reactors, and hot-spot formation could be exploited to achieve excellent CO2 methanation performance at low temperatures.

Development of methanation reactor and related process technology

Methanol to propylene process using moving bed technology and its engineering study

Research Progress in Fluidized Bed Methanation Technology

Discussion on process design and equipment selection for adiabatic methanation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Present situation and analysis of patents on methanation reactors in China

Three-Dimensional Simulation of the Methanation Process in a Circulating Fluidized-Bed Reactor

Research progress in methanation technology at home and abroad

Numerical Investigation on Methanation Kinetic and Flow Behavior in Full-Loop Fluidized Bed Reactor

Advancement on methanol-to-olefin process technology and reactor design overseas

Structure, morphology and function of Anammox granular sludge

Simulation and operation conditions optimization of reactor for syngas methanation

Development of aerobic methane oxidation, denitrification coupled to methanogenesis (AMODM) in a microaerophilic expanded granular sludge blanket biofilm reactor

Bed Packing Configuration and Hot-Spot Utilization for Low-Temperature CO2 Methanation on Monolithic Reactor

Methane Aromatization in Fluidized Bed Reactor

Bubble dynamics and thermochemical characteristics of bubbling fluidized bed methanation

Analysis of external - Recycle reactor for sulfur - Tolerant methanation

Trend of Development from Integrated Methanol to Integrated Ammonia Process and Relevant Technological Basis

DEVELOPMENT AND INDUSTRIAL APPLICATION ANALYSIS OF METHANE DEHYDRO-AROMATIZATION

3D Unsteady Simulation of a Scale-Up Methanation Reactor with Interconnected Cooling Unit