Abstract:The effect of preparation method. Mo content, pretreatment conditions, space velocity, reaction temperature on the preformance of methane aromatization under oxygen-free conditions over HZSM-5 supported Mo catalyst has been studied, the effect of carbon deposition on catalyst after reaction and regeneration by carbon burning with O2 was investigated. It was found that the initial activity of catalysts prepared by grinding technique was higher than that of catalysts prepared by impregnating technique, but the activity of the former decreased quickly with reaction time increased, and decreased obviously after regeneration, while the activity of the latter was similar to that of fresh catalysts. The catalyst with Mo content of 3. 5%��4. 0% showed the best aromatization activity. Decreasing space velocity and increasing reaction temperature improved the aromatization activity. With reaction time increased, the selectivity for ethylene enhanced while selectivity for benzene decreased. Furthermore, XPS results suggested that the most of Mo6+ in the catalysts prepared by impregnating method dispersed in the framework of HZSM-5 zeolite and those of grinding method dispersed on the surface of HZSM-5 zeolite, the carbon content on the catalyst surface increased rapidly, and Mo6+ in the ground catalysts was reduced to Mo0 after reaction for 4 h. On the basis of these results, it is proposed that molybdena carbene with configuration of MoO3 = CH2 is an initial product of methane aromatization reaction.

DEVELOPMENT AND INDUSTRIAL APPLICATION ANALYSIS OF METHANE DEHYDRO-AROMATIZATION

Development and application of energy-saving process for methanol to olefins

Recent Progress in Methane Dehydroaromatization: from Laboratory Curiosities to Promising Technology

Acidity Modification of ZSM-5 for Methane Conversion in Co-feeding Method with MTA Reaction

Thermodynamic Analysis of Propane Aromatization

Methane Dehydroaromatization over Mo/HZSM-5: A Study of Catalytic Process

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

An Integrated Methane Dehydroaromatization and Chemical Looping Process

Methane Aromatization in Fluidized Bed Reactor

Discussion on process design and equipment selection for adiabatic methanation

Development of methanation reactor and related process technology

Energy-Efficient Coaromatization of Methane and Propane

Direct Conversion of Methane to Value-Added Chemicals over Heterogeneous Catalysts: Challenges and Prospects.

Aromatics Production via Methanol-Mediated Transformation Routes

Advancement on methanol-to-olefin process technology and reactor design overseas

Analysis of CO2Fixed by Catalytic Methanation Technology

Coke Formation and Regeneration during Fe-ZSM-5-Catalyzed Methane Dehydro-Aromatization

Reactivity, Selectivity, and Stability of Zeolite-Based Catalysts for Methane Dehydroaromatization

Direct Methane Conversion to Acetic Acid: From Homogeneous Catalysis to Heterogeneous Catalysis

Enhanced Methane Dehydroaromatization Via Coupling with Chemical Looping

Methane Aromatization in a Fluidized Bed Reactor: Parametric Study