Abstract:The catalytic combustion has the advantage of lower auto-ignition temperature and helps to expand the combustible limit of lean premixed gas. However, the intake needs to be preheated to certain temperature commonly through an independent heat exchanger. Similar to the principles of non-catalytic RTO combustion, this paper presents a similar approach whereby the combustion chamber is replaced by a catalytic combustion bed. A new catalytic reactor integrated with a heat recuperator is designed to enhance the heat recirculation effect. Using a two-dimensional computational fluid dynamics model, the performance of the reactor is studied. The reaction performances of the traditional and compact reactors are compared and analyzed. Under the same conditions, the compact reactor has better reaction performance and heat recirculation effect, which can effectively decrease the ignition temperature of feed gas. The influences of the inlet velocity, the inlet temperature, the methane concentration, and the thermal conductivity of porous media on the reaction performance of integrated catalytic reactor are studied. The results show that the inlet velocity, inlet temperature, methane concentration, and thermal conductivity of porous media materials have important effects on the reactor performance and heat recirculation effect, and the thermal conductivity of porous media materials has the most obvious influence. Moreover, the reaction performance of multiunit integrated catalytic reactor is studied. The results show that the regenerative effect of multiunit integrated catalytic reactor is further enhanced. This paper is of great significance to the recycling of low calorific value gas energy and relieving energy stress in the future.

Pressure Drop Profiles in a Flow Reversal Reactor for the Catalytic Combustion

Pressure Drop Profiles in Porous Media Combustion System With Reciprocating Flow

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Mixing characteristics of fixed bed bubble reactor

Pressure Drop and Fluid Flow Characteristics in a Packed Pebble Bed Reactor

Detailed Analysis of the Particle Residence Time Distribution in a Pressurized Drop‐tube Reactor

Pressure Drop and Liquid Holdup in Trickle Bed

Investigation of Pressure Drop for Fluid Flow Through Porous Media: Application to A Pebble-Bed Reactor

Experimental Investigation on Pressure Drop Profiles in a Swiss-Roll Combustor

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Experimental Study on the Pressure Distribution of a CFB Reactor Combined with a Coal Pyrolysis Reactor

Control of Pressure Balance and Solids Circulation Characteristics in DCFB Reactors

Experimental Study on Pressure Drop Profiles of One-Way Flow and Reciprocal Flow in Honeycomb Regenerator System

Design and Performance Investigation of a Compact Catalytic Reactor Integrated with Heat Recuperator

Cold modeling of a direct coupling autothermal methane reforming reactor

Effect of the Key Properties of Catalytic Converter on the Pressure Drop and Velocity Distribution

Influence of outward radial gas flow on particle movement in an annular moving bed

Experimental Study of Reverse Flow Combustion in A Turbulent Flow Field Using PIV

EXPERIMENTAL STUDY ON RESISTANCE OF PACKED BALL REGENERATOR

Experimental and Theoretical Study on the Flow Resistance of Automotive Catalytic Converters