Abstract:SCR systems with complex chemical reaction dynamics are important components of emission aftertreatment systems. Their contradictory emission requirements of higher NOx conversion efficiency and lower NH3 slip can be simultaneously achieved by optimizing the ammonia coverage ratio, which can be accomplished with a nonlinear model predictive control (NMPC) framework. However, how to find a reasonable NMPC approach for optimizing the ammonia coverage ratio and utilize an appropriate method to solve it remain a formidable challenge. In this paper, a two-layer hierarchical control framework for an SCR system is developed to decouple the optimization and tracking control of the ammonia coverage ratio. In the upper layer, an NMPC controller with a long prediction horizon is designed to account for the emission objectives and constraints and generate optimal trajectories for the ammonia coverage ratio. In the lower layer, a robust observing and tracking controller with a short horizon is employed which takes the planned trajectories as the tracking target. Moreover, an improved thermonuclear-initiation and cross-boundary quantum-behaved particle swarm optimization (TC-QPSO) method for optimizing the ammonia coverage ratio based on its dynamic characteristics is proposed to solve the NMPC problem. The simulation results show that the proposed TC-QPSO emission optimization effects of NOx and NH3 are closest to those of the SQP method (the benchmark controller) with a slight computation time penalty. The experimental results under the three transient cycles show that the average NOx conversion efficiency of the proposed two-layer hierarchical control framework with the TC-QPSO algorithm can reach more than 98% with an average NH3 slip of less than 11 ppm, which is able to satisfy emission requirements, and that compared to the traditional QPSO algorithm, the average NH3 slip of the proposed TC-QPSO algorithm is improved by 45.6% with an average NOx conversion efficiency penalty of 1.09% and its emission optimization effects have better robustness for uncertainties in transient cycles.

Conditional integral sliding mode control for SCR denitrification system based on Smith predictor

Sliding Mode Prediction Based Control Algorithm for Discrete-Time Non-Linear Uncertain Coupled Systems.

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Cascade Smith Control of SCR Flue Gas Denitrification System Based on Active Disturbance Rejection

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

An active disturbance rejection stair-like generalized predictive control with time delay weakening for denitrification process in thermal power unit

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine

Adaptive Internal Model Control of SCR Denitration System Based on Multi-Objective Optimization

Multi‐model predictive control of SCR flue gas denitrification system in coal‐fired power plant based on kernel fuzzy c‐means clustering and integrated model

Sliding Mode Predictive Control of Main Steam Pressure in Coal-fired Power Plant Boiler

Predictive control of SCR denitrification system in thermal power plants based on GA‐BP and PSO

Model-free adaptive integral terminal sliding mode predictive control for a class of discrete-time nonlinear systems

Modified Active Disturbance Rejection Control Design Based on Gain Scheduling for Selective Catalytic Reduction Denitrification Processes

The Application of Smith Predictive Sliding Mode Control in Time-delay Systems

Real-time nonlinear model predictive control for optimizing the ammonia coverage ratio of an SCR system based on TC-QPSO

Model-based NH3 Adaptation Method for SCR Control

Towards stable and efficient nitrogen removal in wastewater treatment processes via an adaptive neural network based sliding mode controller

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics

Intelligent ammonia injection control system suitable for full load

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems