Abstract:SCR systems with complex chemical reaction dynamics are important components of emission aftertreatment systems. Their contradictory emission requirements of higher NOx conversion efficiency and lower NH3 slip can be simultaneously achieved by optimizing the ammonia coverage ratio, which can be accomplished with a nonlinear model predictive control (NMPC) framework. However, how to find a reasonable NMPC approach for optimizing the ammonia coverage ratio and utilize an appropriate method to solve it remain a formidable challenge. In this paper, a two-layer hierarchical control framework for an SCR system is developed to decouple the optimization and tracking control of the ammonia coverage ratio. In the upper layer, an NMPC controller with a long prediction horizon is designed to account for the emission objectives and constraints and generate optimal trajectories for the ammonia coverage ratio. In the lower layer, a robust observing and tracking controller with a short horizon is employed which takes the planned trajectories as the tracking target. Moreover, an improved thermonuclear-initiation and cross-boundary quantum-behaved particle swarm optimization (TC-QPSO) method for optimizing the ammonia coverage ratio based on its dynamic characteristics is proposed to solve the NMPC problem. The simulation results show that the proposed TC-QPSO emission optimization effects of NOx and NH3 are closest to those of the SQP method (the benchmark controller) with a slight computation time penalty. The experimental results under the three transient cycles show that the average NOx conversion efficiency of the proposed two-layer hierarchical control framework with the TC-QPSO algorithm can reach more than 98% with an average NH3 slip of less than 11 ppm, which is able to satisfy emission requirements, and that compared to the traditional QPSO algorithm, the average NH3 slip of the proposed TC-QPSO algorithm is improved by 45.6% with an average NOx conversion efficiency penalty of 1.09% and its emission optimization effects have better robustness for uncertainties in transient cycles.

Adaptive Internal Model Control of SCR Denitration System Based on Multi-Objective Optimization

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Multi-loop Adaptive Internal Model Control Based on a Dynamic Partial Least Squares Model

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Multi‐model predictive control of SCR flue gas denitrification system in coal‐fired power plant based on kernel fuzzy c‐means clustering and integrated model

Real-time nonlinear model predictive control for optimizing the ammonia coverage ratio of an SCR system based on TC-QPSO

A Novel Adaptive Generic Model Control Strategy for Internal Thermally Coupled Air Separation Columns with Multivariable Recursive Estimation.

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Performance Assessment and Diagnosis for a SCR Denitration System under Model Predictive Control

Model-based NH3 Adaptation Method for SCR Control

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction

Adaptive Disturbance Rejection Model Predictive Control and Its Application in a Selective Catalytic Reduction Denitrification System.

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Compound Control Strategy Based on Active Disturbance Rejection for Selected Catalytic Reduction Systems

Conditional integral sliding mode control for SCR denitrification system based on Smith predictor

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Process Identification of the SCR System of Coal-Fired Power Plant for De-Nox Based on Historical Operation Data.

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics