Abstract:Owing to the dynamic operation mode of urea selective catalytic reduction (urea-SCR) systems, advanced control strategies are required to improve urea dosing control. A new control-oriented model presentation of urea-SCR systems is developed in this study. A novel controller based on the triple-step non-linear method is designed. The controller drives the non-linear system with time-varying parameters to track the variable ammonia coverage ratio. Unlike the existing triple-step non-linear method, the third design procedure in the proposed method is adjusted as an [Formula: see text] error feedback control. The proposed method provides a concise design process so that derivation of the control law can be simple and straightforward. The robustness of the controller against measurement noises and system uncertainties is analysed. A transient simulation is conducted to evaluate the effectiveness of the proposed control strategy.

What problem does this paper attempt to address?

This paper attempts to solve the control problems in the urea - selective catalytic reduction (urea - SCR) system for diesel engine exhaust gas treatment, especially how to simultaneously achieve high NOx conversion efficiency and low NH3 slip. Specifically, the paper focuses on the following key challenges: 1. **Construction and Simplification of Non - linear Models**: Establish a control - oriented non - linear model and simplify it reasonably. 2. **Operability of Non - linear Control Strategies**: Design an easy - to - implement non - linear control strategy. 3. **Sensitivity of Chemical Reactions to Exhaust Temperature and Engine - emitted NOx**: These parameters change over time, increasing the difficulty of control. 4. **Changes in the Reference Dynamics of the Ammonia Coverage Ratio**: The reference dynamic changes of the ammonia coverage ratio have not been fully discussed. ### Problem Statement The control task of the urea - SCR system is to simultaneously achieve high NOx conversion efficiency and low NH3 slip. To reach this goal, the paper proposes a new controller design based on a three - step non - linear method to track the optimal ammonia coverage ratio. The paper specifically considers the following factors: - Parameters such as exhaust temperature and engine - emitted NOx change over time. - The reference dynamics of the ammonia coverage ratio also change over time. ### Control Objectives According to the EURO VI emission standards, the paper proposes the following control objectives: - The average NOx emission is less than 0.4 g/kWh. - The average NH3 emission is lower than 57 ppm. - The maximum NH3 emission is lower than 83 ppm. ### Method Overview The paper adopts a three - step non - linear control method, which has a concise standard structure. The specific steps are as follows: 1. **Steady - state Control**: Obtain the initial control input by setting the system in a steady state. 2. **Reference Dynamic Feed - forward Control**: Introduce additional control inputs to consider the reference dynamic information. 3. **Non - linear Feedback Control**: Design an error - feedback control to track the reference signal. ### Main Contributions 1. **Establishment of a New Model**: Develop a new control - oriented non - linear model of the urea - SCR system. 2. **Extension of the Three - step Non - linear Method**: Extend the three - step method to a third - order time - varying parameter system. 3. **Improved Third - step Design**: Adjust the third step to H∞ error - feedback control, which improves the suppression effect on second - order dynamic errors. 4. **Controller with a Standard Structure**: The proposed control strategy has a standard structure, which is convenient for engineering implementation. Through these improvements, the paper aims to improve the control performance of the urea - SCR system, especially in the face of time - varying parameters and changes in reference dynamics.

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Robust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Model-based Closed-loop Control of Urea SCR Exhaust Aftertreatment System for Diesel Engine

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Research on Tuning Parameters for a Model Predictive Controller Based on CSA in CSTR Process

Adaptive Extended State Space Predictive Control for a Kind of Nonlinear Systems.

Nonlinear Model Predictive Control Based on Variable Gain

Get the design right, the rest is automatic: Towards an adaptive MPC controller

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Real-time nonlinear model predictive control for optimizing the ammonia coverage ratio of an SCR system based on TC-QPSO

Model-based NH3 Adaptation Method for SCR Control

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

A temporal discretization and spatial integration SCR model with dual temperature-related parameters

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine

Adaptive Internal Model Control of SCR Denitration System Based on Multi-Objective Optimization

Modeling and Control of a Continuous Stirred Tank Reactor Based on a Mixed Logical Dynamical Model