Abstract:To reduce the number of sensors in the SCR catalyst, state feedback and fault diagnosis information are provided. Firstly, a model based on the coupling of flow, heat transfer, and gas-solid phase catalytic reaction in the SCR system is investigated in this paper. The parabolic partial differential equations are simplified by the variable substitution method and the method of lines approach (MOL). The simplified system of equations is solved by backward differentiation formulas (BDF) with adaptive adjustment time step strategy. Meanwhile, the chemical reaction parameters are accurately calibrated per second using the Levenberg-Marquardt method. Secondly, the ATS-UKF is designed in this paper, and to ensure the synchronisation between the ATS-UKF and the SCR model calculations, the time step of solving the BDF by the SCR model is taken as the time step of propagating the sigma points. Two observation scenarios are assumed: (1) no downstream NH 3 concentration sensor, ammonia coverage and downstream NH 3 concentration are observed by ATS-UKF; (2) no downstream NOx sensor, ammonia coverage and downstream NOx concentration are observed by ATS-UKF. Finally, the paper carries out bench tests. In the first case, the ammonia coverage obtained by the ATS-UKF reached 0.99 with respect to the model-calculated value R2. The mean absolute error (MAE) between the observed and experimental values of the ATS-UKF for the downstream NH 3 concentration was 2.76 ppm. In the second case, the ammonia coverage obtained by the ATS-UKF reached 0.99 with respect to the model-calculated value R2, and the MAE between the observed and experimental values of the ATS-UKF for the downstream NOx concentration was 1.53 ppm. Environmental Implication The Adaptive Time-Step Unscented Kalman Filtering (ATS-UKF) enhances urea Selective Catalytic Reduction (SCR) in diesel engines, improving environmental outcomes. This method minimizes sensor dependence, enabling more precise SCR system management and effective emission reduction. By advancing emission control technologies, ATS-UKF contributes to global air pollution mitigation efforts, supporting cleaner air and environmental sustainability. Its innovative approach in monitoring and predicting SCR performance marks a significant step towards eco-friendly diesel engine operation.

Luenberger-Sliding Mode Observer Based Backstepping Control for the SCR System in a Diesel Engine

Robust Nonlinear Disturbance Observer Design for Estimation of Ammonia Storage Ratio in Selective Catalytic Reduction Systems

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Design of extended Kalman filter observer coupled to ammonia cross-sensitivity model for an SCR system

Simultaneous estimation of ammonia injection rate and state of diesel urea-SCR system based on high gain observer

Adaptive time-step unscented kalman filtering (ATS-UKF) based observer design for urea selective catalytic reduction (SCR) performance of diesel engines

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Decoupling Control of Diesel Engine Air System Based on Multi-variable Extended State Observer

Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

Nonlinear Model Predictive Control of Integrated Diesel Engine and Selective Catalytic Reduction System for Simultaneous Fuel Economy Improvement and Emissions Reduction

Conditional integral sliding mode control for SCR denitrification system based on Smith predictor

Real-time nonlinear model predictive control for optimizing the ammonia coverage ratio of an SCR system based on TC-QPSO

Model Predictive Control: A Unified Approach for Urea-Based SCR Systems

Research on cross sensitivity of NOx sensor and Adblue injection volume in accordance with the actual situation based on cubature Kalman filter

Development and verification of model predictive control strategy for selective catalytic reduction with rapid prototyping

Adaptive integral sliding mode fault‐tolerant control for diesel engine air path system via disturbance observer