Abstract:With the development of the vehicle and Diesel engine technology, the selective catalytic reduction (SCR) technology has been paid more attention recently, which is one of the most effective approaches for reducing the nitrogen oxides (NOx) emissions of Diesel engine exhaust. The control strategy of the ammonia coverage ratio of SCR catalyst is vitally important, which directly influences the NOx reduction efficiency and ammonia leakage. To solve such a challenging task, some assumptions are given firstly based on the understanding of the SCR nonlinear dynamic characteristics, and then the SCR nonlinear model is established by the Continuous Stirred Tank Reactor (SCTR) method. The ammonia storage characteristics are studied based on the established model. Then, the stability and observability of the SCR model are analyzed. For the unmeasurable ammonia coverage ratio and storage capacity of catalyst, a state observer based on the extended Kalman filter (EKF) is proposed. The structure of the closed-loop control system and the corresponding model predictive control (MPC) are designed to improve the robustness of the closed-loop system. The SCR test bench performed on the European Steady Cycle (ESC) and European Transient Cycle (ETC) operating condition is performed for the experimental validation of the control strategy. Meanwhile, a comparison between the proposed method and a feedforward control strategy based on MAP is provided to demonstrate the advantage of this closed-loop feedback control method based on EKF and MPC. The experimental results show that the closed-loop control system can effectively reduce the Diesel NOx emissions and avoid the secondary pollution caused by the ammonia leakage which is applicable to the actual Diesel SCR aftertreatment system.

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Development of Urea Dosing Control Unit for SCR After-Treatment System of Heavy Duty Diesel Engine

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Study on Steady and Transient Characteristics of Urea-SCR System for Diesel Engine

Experimental investigation of urea injection strategy for close-coupled SCR aftertreatment system to meet ultra-low NO<i><sub>x</sub></i> emission regulation

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Study on Development of a Urea-SCR System of Diesel Engine

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Experimental Study of Urea-SCR System under Open-Loop Control Strategy

Model-Based Closed-Loop Control Strategy of Diesel Urea-SCR System Simulation

Urea-SCR Process Control for Diesel Engine Using Feedforward-Feedback Nonlinear Method

Experimental Study of the Selective Catalytic Reduction After-Treatment for the Exhaust Emission of a Diesel Engine

Review on Selective Catalytic Reduction Technology of Diesel Engines

Urea injection control strategy in urea-selective catalytic reduction for heavy-duty diesel engine under transient process

Closed-Loop Control Strategy and State Estimator for Diesel Engine SCR After-Treatment System

Design of selective catalytic reduction systems controller for diesel engine using triple-step nonlinear method

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Emission and Control Strategy for the Heavy-duty Diesel Vehicle

Experimental Study on Urea Dosing Strategy for Scr on an Engine Fuelled with Bio-Diesel

Modelling and control of urea-SCR systems through the triple-step non-linear method in consideration of time-varying parameters and reference dynamics