Abstract:In recent years, the International Maritime Organization (IMO), Europe, and the United States and other countries have set up different emission control areas (ECA) for ship exhaust pollutants to enforce more stringent pollutant emission regulations. In order to meet the current IMO Tier III emission regulations, an after-treatment device must be installed in the exhaust system of the ship power plant to reduce the ship NOx emissions. At present, selective catalytic reduction technology (SCR) is one of the main technical routes to resolve excess NOx emissions of marine diesel engines, and is the only NOx emission reduction technology recognized by the IMO that can be used for various ship engines. Compared with the conventional low-pressure SCR system, the high-pressure SCR system can be applied to low-speed marine diesel engines that burn inferior fuels, but its working conditions are relatively harsh, and it can be susceptible to operational problems such as sulfuric acid corrosion, salt blockage, and switching delay during the actual ship tests and ship applications. Therefore, it is necessary to improve the design method and matching strategy of the high-pressure SCR system to achieve a more efficient and reliable operation. This article summarizes the technical characteristics and application problems of marine diesel engine SCR systems in detail, tracks the development trend of the catalytic reaction mechanism, engine tuning, and control strategy under high sulfur exhaust gas conditions. Results showed that low temperature is an important reason for the formation of ammonium nitrate, ammonium sulfate, and other deposits. Additionally, the formed deposits will directly affect the working performance of the SCR systems. The development of SCR technology for marine low-speed engines should be the compromise solution under the requirements of high sulfur fuel, high thermal efficiency, and low pollution emissions. Under the dual restrictions of high sulfur fuel and low exhaust temperature, the low-speed diesel engine SCR systems will inevitably sacrifice part of the engine economy to obtain higher denitrification efficiency and operational reliability.

SCR (selective catalytic reduction) system for small and medium-sized ships

Fluid Mixing Optimization Strategy of Catalytic Reactor for Marine SCR System

Urea control system of SCR reactor

Urea powerful mixing device for SCR system of small and medium-sized ship

Robust, Model-Based Urea Dosing Control for SCR Aftertreatment Systems using a Cross-Sensitive Tailpipe NOx Sensor

Advances in Air Pollution Control for Vessels in China

Selective catalytic reduction denitrification facility suitable for middle -size and small -size boats and ships

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Study of Control Strategy for Urea-SCR After-Treatment System of Heavy Duty Diesel Engine

Ship tail gas washing and purifying system and method suitable for complex swing/start-stop working conditions

Optimization of Automatic Control System for $\text{no}_{\mathrm{x}}$ Emission Reduction in Smart Marine Diesel Engine

Design and testing of an independently controlled urea SCR retrofit system for the reduction of NOx emissions from marine diesels

Review on Selective Catalytic Reduction Technology of Diesel Engines

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Application and Development of Selective Catalytic Reduction Technology for Marine Low-Speed Diesel Engine: Trade-Off among High Sulfur Fuel, High Thermal Efficiency, and Low Pollution Emission

A fuzzy logic urea dosage controller design for two-cell selective catalytic reduction systems

Study on Optimization Simulation of Scr Denitration System for Marine Diesel Engine

Ammonia coverage ratio control of a novel two-cell SCR-DeNOX system configuration based on IA-ISMC

Development of Urea Dosing Control Unit for SCR After-Treatment System of Heavy Duty Diesel Engine

Ship tail gas washing and purifying system suitable for swing or start-stop complex working conditions

Combined removal experiment of NOx, SO2 and PM from marine diesel exhaust gas with SCR-DryEGCS system