Abstract:SCR systems with complex chemical reaction dynamics are important components of emission aftertreatment systems. Their contradictory emission requirements of higher NOx conversion efficiency and lower NH3 slip can be simultaneously achieved by optimizing the ammonia coverage ratio, which can be accomplished with a nonlinear model predictive control (NMPC) framework. However, how to find a reasonable NMPC approach for optimizing the ammonia coverage ratio and utilize an appropriate method to solve it remain a formidable challenge. In this paper, a two-layer hierarchical control framework for an SCR system is developed to decouple the optimization and tracking control of the ammonia coverage ratio. In the upper layer, an NMPC controller with a long prediction horizon is designed to account for the emission objectives and constraints and generate optimal trajectories for the ammonia coverage ratio. In the lower layer, a robust observing and tracking controller with a short horizon is employed which takes the planned trajectories as the tracking target. Moreover, an improved thermonuclear-initiation and cross-boundary quantum-behaved particle swarm optimization (TC-QPSO) method for optimizing the ammonia coverage ratio based on its dynamic characteristics is proposed to solve the NMPC problem. The simulation results show that the proposed TC-QPSO emission optimization effects of NOx and NH3 are closest to those of the SQP method (the benchmark controller) with a slight computation time penalty. The experimental results under the three transient cycles show that the average NOx conversion efficiency of the proposed two-layer hierarchical control framework with the TC-QPSO algorithm can reach more than 98% with an average NH3 slip of less than 11 ppm, which is able to satisfy emission requirements, and that compared to the traditional QPSO algorithm, the average NH3 slip of the proposed TC-QPSO algorithm is improved by 45.6% with an average NOx conversion efficiency penalty of 1.09% and its emission optimization effects have better robustness for uncertainties in transient cycles.

Predictive control of SCR denitrification system in thermal power plants based on GA‐BP and PSO

Model Predictive Control Case Study: Selective Catalytic Reduction (scr) System in Coal-Fired Power Plant

Sustainable Integration of Stream Power Plant Couple of Contaminant Emissions Reduction Technology

Multi‐model predictive control of SCR flue gas denitrification system in coal‐fired power plant based on kernel fuzzy c‐means clustering and integrated model

An active disturbance rejection stair-like generalized predictive control with time delay weakening for denitrification process in thermal power unit

Application of an Improved State Feedback Control in the Selective Catalytic Reduction Denitrification Systems of Coal Power Units Under Variable Load Conditions

Fuzzy Adaptive Generalized Predictive Control for Wastewater Treatment Process

Research on SCR Precise Ammonia Injection Control Based on BP Neural Network

Adaptive nonlinear model predictive control for a class of multivariable chemical processes

Prediction and Control of the Nitrogen Oxides Emission for Environmental Protection Goal Based on Data-Driven Model in the SCR De-Nox System

Neural network model based predictive control for multivariable nonlinear systems

Anticipatory NH3 injection control for SCR system based on the prediction of the inlet NOx concentration

Multi-index control strategy from cement calcination denitration system: a model predictive control method for combined control of nitrogen oxide and ammonia escape

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Real-time nonlinear model predictive control for optimizing the ammonia coverage ratio of an SCR system based on TC-QPSO

Enhancement of SCR denitrification control strategy considering fluegas temperature fluctuation: Fundamental principle and performance evaluation

Prediction of Anoxic Sulfide Biooxidation under Various Hrts Using Artificial Neural Networks

Development of a Real-Time NOx Prediction Soft Sensor Algorithm for Power Plants Based on a Hybrid Boost Integration Model

Model-based urea injection control strategy and ammonia storage estimation for diesel engine SCR system

Nonlinear Predictive Control of Diesel Engine DOC Outlet Temperature

Adaptive Internal Model Control of SCR Denitration System Based on Multi-Objective Optimization