Preparation and application of electrolyte membrane tube

Tian-min HE,Zhe Lü,Li PEI,Peng-fei GUAN,Ying-long HUANG,Wei LIU,Xi-qiang HUANG,Zhi-guo LIU,Jiang LIU,Wen-hui SU

DOI: https://doi.org/10.3969/j.issn.1002-087X.2001.02.012

2001-01-01

Abstract:The dense yittria-stabilized zirconia and alumina membrane tube was prepared using pyridine as dispersant by vacuum casting， which the thickness of the membrane was 0．2 mm and the length was 35 mm． The effect of sintering temperature on the density and ionic conductivity of samples was studied， and the optimal sintering temperature range of the electrolyte membrane with overall properties was determined． The solid oxide fuel cell （SOFC） was made of the YSZ-Al2O3 membrane tube， which was sintered at 1 650 ℃ for 2 h． The electrical property of the SOFC was studied from 600 ℃ to 850 ℃ by using hydrogen as fuel． The results show that the YSZ-Al2O3 membrane tube of high density and high conductivity can be prepared by the vacuum casting， the relative density of the membrane tube reaches 99．0％ of theoretical density at 1 600 ℃ for 2 h， and approaching the theoretical density． The maximum of open voltage for single cell is 1．164 V， and the output power is 0．42 W at 850 ℃．