Abstract:Cryogenic deep reactive ion etching (Cryo DRIE) of silicon has become an enticing but challenging process utilized in front-end fabrication for the semiconductor industry. This method, compared to the Bosch process, yields vertical etch profiles with smoother sidewalls not subjected to scalloping, which are desired for many microelectromechanical systems (MEMS) applications. Smoother sidewalls enhance electrical contact by ensuring more conformal and uniform sidewall coverage, thereby increasing the effective contact area without altering contact dimensions. The versatility of the Cryo DRIE process allows for customization of the etch profiles by adjusting key process parameters such as table temperature, O2 percentage of the total gas flow rate (O2 + SF6), RF bias power, and process pressure. In this work, we undertake a comprehensive study of the effects of Cryo DRIE process parameters on the trench profiles in the structures used to define cantilevers in MEMS devices. Experiments were performed with an Oxford PlasmaPro 100 Estrelas ICP-RIE system using positive photoresist SPR-955 as a mask material. Our findings demonstrate significant influences on the sidewall angle, etch rate, and trench shape due to these parameter modifications. Varying the table temperature between -80°C and -120°C under a constant process pressure of 10 mTorr changes the etch rate from 3 to 4 μm/min, while sidewall angle changes by ~2°, from positive ( 90° relative to the Si surface) tapering. Altering the O2 flow rate with constant SF6 flow results in a notable 10° shift in sidewall tapering. Furthermore, SPR-955 photoresist masks provide selectivity of 46:1 with respect to Si and facilitates the fabrication of MEMS devices with precise dimension control ranging from 1 to 100 μm for etching depths up to 42 μm using Cryo DRIE. Understanding the influence of each parameter is crucial for optimizing MEMS device fabrication.

Application of ICP Etching Technology in MEMS Field

Micro-dielectric-droplet impingement cooling system based on MEMS

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Effective Approaches to Improve Au Etching Process Performance in MEMS Devices

Hybrid Si Etching for Performance Enhancement of the Atmospheric CMOS MEMS Infrared Sensor

Optimization of Etching Processes for the Fabrication of Smooth Silicon Carbide Membranes for Applications in Quantum Technology

Deep Reactive Ion Etching of Z-Cut Alpha Quartz for MEMS Resonant Devices Fabrication

High Aspect Ratio Si Etching Technique and Application

Cryogenic DRIE Processes for High-Precision Silicon Etching in MEMS Applications

Study on Compatible CMOS-MEMS Process with Surface Micromachining for the Application of Monolithic Integration

Study on New Method of MEMS Monolithic Integration and Its Key Technology

Application of PECVD SiC in glass micromachining

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Design and Application of a Metal Wet-Etching Post-Process for the Improvement of CMOS-MEMS Capacitive Sensors

Investigation and Modeling of Etching Through Silicon Carbide Vias (TSiCV) for SiC Interposer and Deep SiC Etching for Harsh Environment MEMS by DoE

Chemical Etching Processes at the Dynamic GaAs/Electrolyte Interface in the Electrochemical Direct-Writing Micromachining

Design and fabrication of uncooled MEMS capacitive FPA for IR imaging

Study of Polyimide As Sacrificial Layer with O-2 Plasma Releasing for Its Application in Mems Capacitive Fpa Fabrication

Robust Free‐Standing Nano‐Thin SiC Membranes Enable Direct Photolithography for MEMS Sensing Applications

Wafer level bulk titanium ICP etching using SU8 as an etching mask