Abstract:Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.

Study on variable mass flow laws in π-shaped centripetal radial flow adsorber

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Fabrication of wall-flow honeycomb micro packed bed and application in pressure swing adsorption process

Performance Design of a Cryogenic Air Separation Unit for Variable Working Conditions Using the Lumped Parameter Model

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

Analysis of flow distribution in a horizontal-type molecular sieve adsorber

Experimental study on oxygen concentrator with wide product flow rate range: individual parametric effect and process improvement strategy

Study of adsorption performance of vertical radial flow dual-bed adsorber used in air sparation unit

Evaluation of oxygen separation from air by pressure/vacuum swing adsorption

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Flow characteristics of radial flow adsorber and its structure parameters optimization

The Production of Industrial-Grade Oxygen from Air by Pressure Swing Adsorption

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

To the problem of forming the equation system for pressure swing adsorption mathematical model

Plateau-Adapted Single-Pump, Single-Bed Vacuum Pressure Swing Adsorption Oxygen Generation Process Simulation and Optimization

Adsorbent Characteristic Regulation and Performance Optimization for Pressure Swing Adsorption Via Temperature Elevation

Influence Factors of Pressure Swing Adsorption for Oxygen Production by the Orthogonal Method and the Response Surface Method

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale