Abstract:Due to the increasing global demand for industrial gas, the development of large-scale cryogenic air separation systems has attracted considerable attention in recent years. Increasing the height of the adsorption bed in a vertical radial flow adsorber used in cryogenic air separation systems may efficiently increase the treatment capacity of the air in the adsorber. However, uniformity of the flow distribution of the air inside the adsorber would be deteriorated using the height-increasing method. In order to reduce the non-uniformity of the flow distribution caused by the excessive height of adsorption bed in a vertical radial flow adsorber, a novel parallel connection method is proposed in the present work. The experimental apparatus is designed and constructed; the Computational Fluid Dynamics (CFD) technique is used to develop a CFD-based model, which is used to analyze the flow distribution, the static pressure drop and the radial velocity in the newly designed adsorber. In addition, the geometric parameters of annular flow channels and the adsorption bed thickness of the upper unit in the parallel-connected vertical radial flow adsorber are optimized, so that the upper and lower adsorption units could be penetrated by air simultaneously. Comparisons are made between the height-increasing method and the parallel connection method with the same adsorber height. It is shown that using the parallel connection method could reduce the difference between the maximum and minimum radial static pressure drop by 86.2% and improve the uniformity by 80% compared with those of using the height-increasing method. The optimal thickness ratio of the upper and lower adsorption units is obtained as 0.966, in which case the upper and lower adsorption units could be penetrated by air simultaneously, so that the adsorbents in adsorption space could be used more efficiently.

Flow characteristics of radial flow adsorber and its structure parameters optimization

Analysis of flow distribution in a horizontal-type molecular sieve adsorber

Modeling Axial Distributions of Adsorbent Particle Size and Local Voidage in Expanded Bed

Study of adsorption performance of vertical radial flow dual-bed adsorber used in air sparation unit

Investigation on a Vertical Radial Flow Adsorber Designed by a Novel Parallel Connection Method

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Measurement and modeling of axial distribution of adsorbent particles in expanded bed: taking into account the particle density difference

Study on Adsorption Characteristics Optimization of Vertical Radial Flow Adsorber

A Mathematical Model for Designing Optimal Shape for the Cone Used in Z-flow Type Radial Flow Adsorbers

Simulation of flow field in vertical radial flow adsorber with parallel connection device

Theoretical analysis of uniform flow distribution in vertical radial adsorption bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Experimental investigation on separation characteristics of axial cyclone separator

Structure effect of industrial loop reactors on non-uniform flow characteristics

Numerical study of gas-solid flow in a radial-inlet structure cyclone separator

Discussion on the influence of internal components on the flow field distribution of a new gas–solid non-catalytic fluidized bed (NRFB)

Performance Evaluation of a Vertical Radial Flow Adsorber Based on Binary Adsorption of CO2 and H2O

Numerical Investigation on the Flow Characteristics of Liquid Oxygen and Water in the Structured Packing

Influence of outward radial gas flow on particle movement in an annular moving bed

Experimental Investigation on Flow Asymmetry in Solid Entrance Region of A Square Circulating Fluidized Bed

Thermal Distribution in Axial-Flow Fixed Bed with Flowing Gas