Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process
Peixuan Hao,Yixiang Shi,Shuang Li,Xuancan Zhu,Ningsheng Cai
DOI: https://doi.org/10.1016/j.fuel.2018.05.030
IF: 7.4
2018-01-01
Fuel
Abstract:In the pressure swing adsorption (PSA) technique for gas separation, the working performance of the adsorbent determines the efficiency of the separation unit. Excellent kinetic performance, high adsorption capacity, and selectivity are all critical for the utilization of adsorbents. This work presents a 4-bed PSA model for H-2/CO2 separation to evaluate the real-time H-2 purification capability of adsorbents with different kinetic performance, adsorption capacity, and selectivity. The experimental data on a test-scale PSA apparatus were used for model validation. The purity of H-2 at the outlet was exactly 99% and the H-2 recovery rate ranged from 70% to over 95%; hence, the extent of gas recovery was representative of the working performance. Theoretical analysis of the PSA process indicates that H-2 is discharged at the blow-down and purge steps, and that the amount of H-2 wasted in these steps is inversely proportional to the adsorption capacity and selectivity. This inverse relation was demonstrated by simulation, in which the correlation coefficient reached 0.99. When the kinetic performance was poor, the kinetic parameter k(a-CO2) was less than 0.1, and separation was highly dependent on the adsorption and desorption rate. When k(a-CO2) > 0.3, the dependency was not evident. The simulation results were used to analyze the limitations of the kinds of CO2 adsorbents, identify areas of improvement, and thus achieve better working performance.