Abstract:The heterogeneous nucleation process of polypropylene (PP)/high density polyethylene (HDPE)/thermoplastic elastomer (POE) composites was realized through blending modification, and characterization techniques, including scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and dynamic mechanical analysis, were used to analyze the pattern of the impact of modified dicyclohexyl-terephthalamide (TMB-5) on the mechanical properties and thermal stability of the PP/HDPE/POE composites. The results indicated that the modified TMB-5 was advantageous to the improvement of the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites. When the amount of added modified TMB-5 was 0.4%, the impact strength and tensile strength of the PP/HDPE/POE composites increased to 36.3 kJ/m 2 and 31.7 MPa, respectively, which were, respectively, 99.5% and 8.5% higher than those of the materials prepared when the amount of added modified TMB was 0.1%. The materials had higher storage modulus in room-temperature and high-temperature environments: 2,438.2 MPa (room temperature), 1,103.9 MPa (120°C), and 1,054.8 MPa (140°C). In addition, the capability of the PP/HDPE/POE composites to crystallize was improved continuously, and the crystallinity increased considerably. At the same time, the crystallization and melting temperatures increased, β-crystal formation was induced, and glass transition temperature increased, thus effectively improving the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites.

Study on Coating Properties of TPE Materials and PP Framework

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Effect of Composition on Processing and Mechanical Properties of TPE for Injection Molding Automotive Skin

Effect of SEBS Molecular Structure and Formula Composition on the Performance of SEBS/PP TPE for Automotive Interior Skin

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Study of Polypropylene Thermoplastic Elastomer

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Effect of Lubricants on the Properties of PP/POE Blends

Progress in Study of PP Thermoplastic Elastomers

Study on Mechanical Behaviors of Thermoplastic Materials Used for Automobile Rear Door Panels

The Studies on the Mechanical and Thermodynamic Properties of Surface Fluorinated Polypropylene/Polypropylene Blends

Study on properties of HDPE/LLDPE/POE blown films

Preparation, Morphology and Properties of Poly(Trimethylene Terephthalate)/Thermoplastic Polyester Elastomer Blends

Study on Structure and Property of PP/TPU Melt-Blown Nonwovens

Chemically foamed thermoplastic elastomer (TPE) material and preparation method thereof

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

Preparation and Characterization of High Melt Strength Thermoplastic Polyester Elastomer with Different Topological Structure Using a Two-Step Functional Group Reaction

THE MECHANICAL AND MELTING CRYSTALLIZATION PROPERTIES OF β-FORM POLYPROPYLENE/POE BLENDS