Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Study on properties of HDPE/LLDPE/POE blown films

Study on Property of HDPE/UHMWPE Blown Film

Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene

The Microstructure-Tensile Property Relationship of Polyethylene Resin for Biaxially Stretched Film

Modified high-density polyethylene films: preparation, composition and their physical properties

High density polyethylene film toughened with polypropylene and linear low density polyethylene

Influence of POE on Properties of Blown Extrusion Film of PET

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Hdpe/Uhmwpe Blown Films Modified by Poe and Caco3

Preparation of HDPE/UHMWPE/MMWPE Blends by Two-Step Processing Way and Properties of Blown Films

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Study on Property of HDPE/POE/CaCO3 Blown Films by Masterbatch Way

Studying on the Properties of Crosslinked PLA/PBAT Blown Films

Study on Mechanical Properties of PP/POE Blends

Effect of Mixing Poly(lactic Acid) with Glycidyl Methacrylate Grafted Poly(ethylene Octene) on Optical and Mechanical Properties of the Blown Films

Properties of HDPE/UHMWPE Blown Films

Rheological, Thermal and Mechanical Properties of Biodegradable Poly(lactic Acid)/poly(butylene Adipate-Co-terephthalate)/poly(propylene Carbonate) Polyurethane Trinary Blown Films

Effect of Ethylene‐propylene Copolymer with Residual PE Crystallinity on Mechanical Properties and Morphology of PP/HDPE Blends

Mechanical And Rheological Properties Of Lldpe/Hdpe, Lldpe/Eva Blends

Study on Preparation and Properties of Fully-Biodegradable PLA/PPA/PBS Blown Films

Reactive Processing of Poly(lactic Acid)/poly(ethylene Octene) Blend Film with Tailored Interfacial Intermolecular Entanglement and Toughening Mechanism