Abstract:To address the dilemma of the stiffness and toughness properties of high-density polyethylene (HDPE) composites, titanate coupling agent-treated CaCO3 nanoparticles (nano-CaCO3) and ethylene–octene copolymer (POE) were utilized to blend with HDPE to prepare ternary nanocomposites via a two-sequence-step process. Meanwhile, a one-step process was also studied as a control. The obtained ternary nanocomposites were characterized by scanning electron microscopy (SEM), Advanced Rheometrics Expansion System (ARES), Dynamic Mechanical Analysis (DMA), wide-angle X-ray diffraction analysis (WXRD), and mechanical test. The SEM results showed one or two CaCO3 nanoparticles were well-encapsulated by POE and were uniformly dispersed into the HDPE matrix to form a core–shell structure of 100–200 nm in size by the two-step process, while CaCO3 nanoparticles were aggregated in the HDPE matrix by the one-step method. The result of the XRD showed that the nano-CaCO3 particle played a role in promoting crystallization in HDPE nanocomposites. Mechanical tests showed that the synergistic effect of both the POE elastomer and CaCO3 nanoparticles should account for the balanced performance of the ternary composites. In comparison with neat HDPE, the notched impact toughness of the ternary nanocomposites of HDPE/POE/nano-CaCO3 was significantly increased. In addition, the core–shell structure absorbed the fracture impact energy and prevent further propagation of micro-cracks, thus obtaining a higher notched Izod impact strength.

Hdpe/Uhmwpe Blown Films Modified by Poe and Caco3

Effects of Carbon Black Content on Microwave Absorbing and Mechanical Properties of Linear Low Density Polyethylene/Ethylene-Octene Copolymer/Calcium Carbonate Composites

Dynamic Mechanical Properties and Morphology of High‐density Polyethylene/caco3 Blends with and Without an Impact Modifier

Study on properties of HDPE/LLDPE/POE blown films

Properties of HDPE/UHMWPE Blown Films

Study on LLDPE/mPE Thin Film Blown Modified by the Super-fine Ground CaCO_3

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Preparation of HDPE/UHMWPE/MMWPE Blends by Two-Step Processing Way and Properties of Blown Films

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Mechanical Properties and Volume Dilatation of HDPE/CaCO3 Blends with and Without Impact Modifier

The Influence of Calcium Carbonate on the Mechanical Properties and Phase Morphology of PA6/PP Blend

Exploring the Effects of Nano-CaCO3 on the Core–Shell Structure and Properties of HDPE/POE/Nano-CaCO3 Ternary Nanocomposites

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Physical and Thermal Properties of High-Density Polyethylene Film Modified with Polypropylene and Linear Low-Density Polyethylene

Study on Property of HDPE/POE/CaCO3 Blown Films by Masterbatch Way

Mechanical Properties and Microstructure of the HDPE/Al(OH)3/POE Composite

High density polyethylene film toughened with polypropylene and linear low density polyethylene

TOUGHENING OF POLYLACTIDE BY MELT BLENDING WITH POLYETHYLENE-OCTENE COPOLYMER

Studies on Structure and Properties of Hdpe Functionalized Through Ultraviolet Irradiation and Its Blends with Caco3

Preparation and Property of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) /poly(ethylene Glycol)blend Film

Unsaturated Hyperbranched Polyester As a Surface Modifier of CaCO3 and Enhanced Effect on Mechanical Properties of HDPE/CaCO3 Composites