Abstract:The dispersion mechanism of inorganic particles in hybrid sizing agent is proposed. Commercial carbon fiber is converted into prepreg. The effect of using hybrid sizing agent to improve the mechanical properties of composite materials is demonstrated. Improving the interfacial adhesion of carbon fiber (CF)/polymer composite is an urgent demand to enhance its mechanical properties. A kind of poly(aryl ether ketone) with carboxyl groups (PAEK‐COOH) was newly synthesized. PAEK‐COOH is similar to the thermal properties of PPEK matrix. Hydroxyapatite (HAp) was easily dispersed in an NMP solution containing PAEK‐COOH. Different kinds of hybrid sizing agents were obtained for preparing the prepreg through the solution impregnation. The hot‐pressing method was employed to produce the laminated composites. Flexural strength, flexural modulus and interlamellar shear strength (ILSS) of 0HP@CF/PPEK composites were improved by 8.8%, 17.3%, and 14.7%, respectively, in comparison to desized CF/PPEK. The interface bonding between CF and PPEK was improved by the addition of PAEK‐COOH sizing agent. Meanwhile, compared with desized CF/PPEK laminates, flexural strength, flexural modulus and ILSS of 5HP@CF/PPEK composites were enhanced by 63.5%, 87.4%, and 40.9%, respectively. The crack propagation path became dispersed and the stress was effectively absorbed when the sizing agent containing nano‐hydroxyapatite particles. By characterizing and reconstructing the transverse and longitudinal fracture in composite materials, the failure process of the composites under the action of stress was explained, and the interface theories of CF reinforced polymer were further explored. Highlights A kind of polyaryl ether ketone containing carboxyl functional group (PAEK‐COOH)was newly synthesized. HAp was distributed in the polymer sizing agent to obtain a HAp/PAEK‐COOH hybrid sizing agent. The interfacial adhesion of CF/PPEK composite was greatly improved by the hybrid sizing agent.

Unsaturated Hyperbranched Polyester As a Surface Modifier of CaCO3 and Enhanced Effect on Mechanical Properties of HDPE/CaCO3 Composites

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Effects of Microcapsules Modification on Interfacial Compatibility of Unsaturated Polyester Self-healing Composites

Porous poly(vinylidene fluoride) membrane modified with hyperbranched poly(amine-ester)

Mechanical and Thermal Properties of Polypropylene (PP) Composites Filled with CaCO3 and Shell Waste Derived Bio-Fillers

Poly(methyl dihydroxybenzoate) modified waterborne polyurethane sizing coatings with chemical and hydrogen-bonded complex cross-linking structures for improving the surface wettability and mechanical properties of carbon fiber

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Preparation of a water-based carboxylated Poly(phthalazione ether nitrile) sizing agent for interfacial reinforcement of CF/PPESK composites

Synthesis of hyperbranched polyurethane sizing agent with high-solid content via self-catalytic method for improving interfacial adhesion of CF/PA6 composites

Study of UHMWPE Fiber Surface Modification and the Properties of UHMWPE/Epoxy Composite

Synergistic surface modification of anhydrous calcium sulfate by polydopamine/oleylamine and its application in reinforced HDPE composites

Research on the impact of active calcium carbonate on the performance of degradable composite films

Preparation and Characterization of Composites: Ethylene–propylene–diene Terpolymer‐graft‐maleic Anhydride/caco3

Study on the mechanism of waterborne polyurethane modified ultrafine ground calcium carbonate and its properties in polypropylene plastics

The Hyperbranched Polyester Reinforced Unsaturated Polyester Resin

Enhancing interfacial adhesion of carbon fiber/poly(phthalazinone ether ketone) composites by the hybrid sizing agent of hydroxyapatite‐reinforced PAEK‐COOH

Interfacial Structures and Mechanical Properties of Pvc Composites Reinforced by Caco3 with Different Particle Sizes and Surface Treatments

Hdpe/Uhmwpe Blown Films Modified by Poe and Caco3

Dynamic Mechanical Properties and Morphology of High‐density Polyethylene/caco3 Blends with and Without an Impact Modifier

Preparation of Waterborne Hyperbranched Polyurethane Acrylate/ldh Nanocomposite

Compatibilization of irradiated HDPE