Abstract:By introducing high density polyethylene (HDPE) into the dispersed phase of impact polypropylene copolymers (IPCs), the morphologies of IPC/HDPE blends were regularly tailored and consequently the tensile and impact properties were simultaneously improved. Morphological observations showed a series of multilayered core-shell dispersed particles when the content of HDPE was less than 40%, while the continuous network structure was observed beyond 40%. With an increase in the content of HDPE, the size of the core increased and the number of dispersed particles with incomplete encapsulated polyethylene (PE) cores rose. More valid 'bridges' made up of segmented ethylene-propylene copolymer (sEbP) appeared and connected the PE core and polypropylene (PP) matrix. Meanwhile, co-crystallization occurred in the core phase, between long ethylene chain segments of the joined HDPE and sEbP in multi-component IPCs. The increased HDPE in blends reduced defective co-crystals, and in turn led to a thicker average lamellar thickness and thinner amorphous thickness of PE. Partial inserted ethylene-propylene random sequences are constrained by narrowed PE amorphous layers. Hence, the connection between the PP matrix and the dispersed phase was strengthened by co-crystals, 'bridges' and restriction effects. The tensile strength of the blends was slightly enhanced with an increase in HDPE, while the greatly improved toughness was achieved at a HDPE content of 30 wt% and kept constant with more HDPE. Thus, the interactions rather than core-shell phase morphology are regarded as the predominate factor for the excellent properties.

Effect of Ethylene‐propylene Copolymer with Residual PE Crystallinity on Mechanical Properties and Morphology of PP/HDPE Blends

Enhanced Multiphase Interfacial Interaction of Impact Polypropylene Copolymer by In-Situ Introducing Polyethylene

The Effect of Propylene–ethylene Copolymers with Different Comonomer Content on Melting and Crystallization Behavior of Polypropylene

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

Preparation and Properties of High Modulus and High Impact Polypropylene Composites

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Mechanical Properties and Morphology of LDPE/PP Blends

MORPHOLOGY AND PROPERTIES OF POLYPROPYLENE ETHYLENE DIMETHYLAMINOETHYL METHACRYLATE COPOLYMER BLENDS

Study on Morphology and Properties of PP/EOC Blends

Characterization of PP/EPDM/HDPE Ternary Blends: The Role of Two EPDM with Different Viscosity and Processing Method

Effect of cross-linked LLDPE/PP blend (LLDPE-PP) as compatibilizer on morphology, crystallization behavior and mechanical property of LLDPE/PP blends

Effect Of Poly(Epichlorohydrin) On The Thermal And Mechanical Properties Of Poly(Vinyl Chloride)

Rheological Properties and Morphological Evolutions of Polypropylene/Ethylene-Butene Copolymer Blends

Mechanical Properties and Crystallization Behavior of High Fluidity Polypropylene/metallocene Poly(ethylene–butene–hexene) Copolymer Blends

Relationship between Microstructure and Mechanical Properties of Ethylene-Octene Copolymer Reinforced and Toughened PP

Morphology and properties of PP/PC blends compatibilized with E-MA-GMA

Effect of Different Polypropylene on the Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene

Effect of Fibrillar Morphology on Elastomer‐modified Polypropylene

Thermal and Crystallization Properties of HDPE and HDPE/PP Blends Modified with DCP

Effect of high-density polyethylene-g-maleic anhydride on the morphology and properties of (high-density polyethylene)/(ethylene–vinyl alcohol) copolymer alloys

Deformation and morphology development of poly(ethylene terephthalate)/polyethylene and polycarbonate/polyethylene blends with high interfacial contact during elongation