Abstract:Polyamide/polypropylene (PA1010/PP) blends were prepared by melt mixing using maleic anhydride-grafted ethylene-octene copolymer (POE-g-PMAH) as a reactive compatibilizer. The compatibilizing effects of POE-g-PMAH on PA1010/PP blends were investigated by means of scaning electron microscopy (SEM), mechanical testing, Fourier transform infrared spectroscopy (FTIR) and differential scaning calorimetry (DSC), respectively. It was found that the addition of POE-g-PMAH could decrease the size of the dispersed PP particles, when the mass ratio of PA1010/PP/P0E-g-PMAH = 70/30/15, the domains showed a fine and uniform dispersion in the matrix. FTIR results showed that the anhydride carbonyl groups of POE-g-PMAH reacted with the end groups of PA1010 in the blending process. DSC results showed that addition of POE-g-PMAH decreased the crystallization temperature and crystallinity of PA1010 and PP in the blends, indicating that POE-g-PMAH had an inhibition effect on the crystallization of PA1010 and PP. Mechanical testing indicated that with increasing the POE-g-PMAH content, the Izod impact strength of dried samples increased gradually, when the content of POE-g-PMAH was 15%, the Izod impact strength of dried samples was 21. 13 kJ/m2, which is 3. 1 times that for the binary PA1010/PP blend. Meanwhile, the flexural strength, tensile strength and modulus can be maintained at a relatively high level. The compatibilization mechanism of POE-g-PMAH lied in the chemical interactions occuring between the terminal amino groups of PA1010 and anhydride of MAH in POE-g-PMAH during the melt mixing, and the compatibility between PP and ethylene-octene of POE in POE-g-PMAH. Hense the addition of POE-g-PMAH decreased the interfacial tension and the domain size dramatically, improved the mechanical properties greatly.

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Thermal and Crystallization Properties of HDPE and HDPE/PP Blends Modified with DCP

Influences of Dicumyl Peroxide on Morphology and Mechanical Properties of Polypropylene/poly(styrene‐b‐butadiene‐b‐styrene) Blends Via Vane‐extruder

Effect of Ethylene‐propylene Copolymer with Residual PE Crystallinity on Mechanical Properties and Morphology of PP/HDPE Blends

Influence of Different Peroxides on Structure and Properties of High Impact Polypropylene Prepared by Controlled-rheology Degradation

Effect of cross-linked LLDPE/PP blend (LLDPE-PP) as compatibilizer on morphology, crystallization behavior and mechanical property of LLDPE/PP blends

The Effect of Dialkyl Peroxide Crosslinking on the Properties of LLDPE and UHMWPE

Rheology and Thermal Properties of Polypropylene Modified by Reactive Extrusion with Dicumyl Peroxide and Trimethylol Propane Triacrylate

Structure and Properties of Reactive Extruded Ethylene-Block-Co-Polypropylene: Influence of Dicumyl Peroxide and Divinylbenzene

Mechanical Properties and Morphology of LDPE/PP Blends

Study on processing of ultrahigh molecular weight polyethylene/polypropylene blends

The Effect of Benzoyl Peroxide and Divinyl Benzene on the Properties of Cross-Linked Recycled Polyolefin Blends

Study on the Effect of Dicumyl Peroxide on Structure and Properties of Poly(Lactic Acid)/Natural Rubber Blend

Polyethylene Foam Materials Cross-Linked by Dicumyl Peroxide

Significant Toughness Improvement in Ipp/plla/egma Blend by Introducing Dicumyl Peroxide As the Morphology Governor

MORPHOLOGY AND PROPERTIES OF POLYPROPYLENE ETHYLENE DIMETHYLAMINOETHYL METHACRYLATE COPOLYMER BLENDS

Properties of PA1010/PP blends modified by reactive compatibilization with POE-g-PMAH

Investigation on Multifunctional Monomer Modified Polypropylene and Its Foamability

Inlfuence of Modiifcation by Grafting with Peroxide on Environmental Stress Cracking Resistance of PE-HD

Studies on blends of high-density polyethylene and polypropylene produced by oscillating shear stress field

Effect of Different Polypropylene on the Rheological and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene