Abstract:Crosslinking and processing characteristics of polyethylenes (PEs) with different molecular architectures, namely high‐density polyethylene (HDPE), linear low‐density polyethylene (LLDPE), and low‐density polyethylene (LDPE), were studied with regard to the effects of peroxide modifications and coolant flow rates. Dicumyl peroxide (DCP) and di‐ tert ‐butyl peroxide (DTBP) were used as free‐radical inducers for crosslinking the PEs. The characteristics of interest included normalized gel content, real‐time temperature profiles and their cooling rates, exothermic period, crystallinity level, crystallization temperature, and heat distortion temperature. The experiments showed that LDPE exhibited the highest normalized gel content. The real‐time cooling rates, taken from the temperature profiles for all PEs before the crystallization region, were greater than those after the crystallization region. The cooling rate of the PEs increased with the presence of DCP, whereas the crystallization temperature of the PEs was lowered. The HDPE appeared to show the longest exothermic period as compared with those of the LLDPE and LDPE. The exothermic period showed an increase with increasing coolant flow rate, but it was decreased by the use of DCP. As for the effect of peroxide type, the gel content and cooling rate of the PE crosslinked by DCP were higher than those for the PE crosslinked by DTBP. The DTBP was the more effective peroxide for introducing crosslinks and simultaneously maintaining the crystallization behavior of the PE. J. VINYL ADDIT. TECHNOL., 20:80‐90, 2014. © 2014 Society of Plastics Engineers

Polyethylene Foam Materials Cross-Linked by Dicumyl Peroxide

Effects of dicumyl peroxide on cross‐linking pure poly(butylene succinate) foaming materials for high expansion and high mechanical strength

Research on Crosslinking of Polylactide Using Low Concentration of Dicumyl Peroxide

Study on Crosslinking of Polyethylene–Octene Elastomer with Dicumyl Peroxide

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Crosslinking of Poly(propylene carbonate) by Peroxide Crosslinking Agent Dicumyl Peroxide (DCP)

Thermal characteristics and temperature profile changes of structurally different polyethylenes with peroxide modifications

Extrusion Foaming of DCP Slightly Cross-linked High-density Polyethylene by Supercritical CO_2

Mechanical Performance of Expanded Polypropylene Using One-Step Compression Molding Method

The Effect of Dialkyl Peroxide Crosslinking on the Properties of LLDPE and UHMWPE

Thermal and Crystallization Properties of HDPE and HDPE/PP Blends Modified with DCP

Thermal, mechanical, and dielectric behaviors of crosslinked linear low density polyethylene/polyolefin elastomers blends

Effects of Novel Polyhedral Oligomeric Silsesquioxane Containing Hydroxyl Group and Epoxy Group on the Dicyclopentadiene Bisphenol Dicyanate Ester Composites

Structure and Properties of Reactive Extruded Ethylene-Block-Co-Polypropylene: Influence of Dicumyl Peroxide and Divinylbenzene

Melt Strength and Foaming Behavior of Crosslinked PP/LDPE Blend

Rheologic Studies on Chemical Cross-Linking Kinetics for LDPE

The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

Effect of dicumyl peroxide on space charge accumulation characteristics of cross-linked polyethylene

Preparation of Long-Chain Branching Polypropylene and Investigation on Its Foamability

Study on the Effect of Dicumyl Peroxide on Structure and Properties of Poly(Lactic Acid)/Natural Rubber Blend

Critical Effects of Polyethylene Addition on the Autoclave Foaming Behavior of Polypropylene and the Melting Behavior of Polypropylene Foams Blown with N-Pentane and CO2