Abstract:Crosslinking and processing characteristics of polyethylenes (PEs) with different molecular architectures, namely high‐density polyethylene (HDPE), linear low‐density polyethylene (LLDPE), and low‐density polyethylene (LDPE), were studied with regard to the effects of peroxide modifications and coolant flow rates. Dicumyl peroxide (DCP) and di‐ tert ‐butyl peroxide (DTBP) were used as free‐radical inducers for crosslinking the PEs. The characteristics of interest included normalized gel content, real‐time temperature profiles and their cooling rates, exothermic period, crystallinity level, crystallization temperature, and heat distortion temperature. The experiments showed that LDPE exhibited the highest normalized gel content. The real‐time cooling rates, taken from the temperature profiles for all PEs before the crystallization region, were greater than those after the crystallization region. The cooling rate of the PEs increased with the presence of DCP, whereas the crystallization temperature of the PEs was lowered. The HDPE appeared to show the longest exothermic period as compared with those of the LLDPE and LDPE. The exothermic period showed an increase with increasing coolant flow rate, but it was decreased by the use of DCP. As for the effect of peroxide type, the gel content and cooling rate of the PE crosslinked by DCP were higher than those for the PE crosslinked by DTBP. The DTBP was the more effective peroxide for introducing crosslinks and simultaneously maintaining the crystallization behavior of the PE. J. VINYL ADDIT. TECHNOL., 20:80‐90, 2014. © 2014 Society of Plastics Engineers

Thermal and Crystallization Properties of HDPE and HDPE/PP Blends Modified with DCP

The Effect of PP and Peroxide on the Properties and Morphology of HDPE and HDPE/PP Blends

Inlfuence of Modiifcation by Grafting with Peroxide on Environmental Stress Cracking Resistance of PE-HD

Thermal characteristics and temperature profile changes of structurally different polyethylenes with peroxide modifications

Effect of Ethylene‐propylene Copolymer with Residual PE Crystallinity on Mechanical Properties and Morphology of PP/HDPE Blends

The effect of chemical crosslinking on the properties of Rotomolded high density polyethylene

Effect of PEG on the crystallization of PPDO/PEG blends

The Effect of Propylene–ethylene Copolymers with Different Comonomer Content on Melting and Crystallization Behavior of Polypropylene

Studies on the Structure, Morphology and Thermal Properties of HDPE/ Petroleum Resin Blends

Crystallization behaviors of polypropylene and functional polypropylene

Research on Crosslinking of Polylactide Using Low Concentration of Dicumyl Peroxide

Crystallization Behaviors and Morphology of Polypropylene Containing Nucleating and Degradation Agents

Thermal Properties of High-Density Polyethylene-Petroleum Resin Blends

Structure and Properties of Reactive Extruded Ethylene-Block-Co-Polypropylene: Influence of Dicumyl Peroxide and Divinylbenzene

Crystallization behavior of polypropylene/polycarbonate blends

The Effect of the DCP on the Property of PP/GF/UP Composite

Morphology, crystallization and melting behaviors of isotactic polypropylene/high density polyethylene blend: effect of the addition of short carbon fiber

Thermal Performance and Crystallinity of Injection Moulding PPES/PPS Blend

Fractionated Crystallization of Hdpe in Ps/Poe/Hdpe/Sbs Blends

Influence of High-Density Polyethylene and Nano-Calcium Carbonate of Various Content Ratios on the Crystallization of Polypropylene

Rheology and Thermal Properties of Polypropylene Modified by Reactive Extrusion with Dicumyl Peroxide and Trimethylol Propane Triacrylate