Abstract:Abstract Thermoplastic elastomer foams based on styrene–ethylene–butylene–styrene (SEBS)/polypropylene (PP) were produced by using different processing techniques such as extrusion and injection molding to achieve optimized mechanical and thermal properties in terms of strength, elongation, and damping capability. Foaming is a method of introducing gas-filled cells into the material and it is considered an effective way to meet the requirements for higher impact resistance with low density and relatively low hardness. In this study, microspheres were used as a foaming agent and were introduced to the system by using an injection molding machine. They were used in different percentages and ranged from 1 and 3%. They decrease the density of the product thereby lowering the weight and cost. Besides improving damping abilities and decreasing the density, inorganic fillers such as talc, silica, and calcium carbonate were used to increase the mechanical strength, and their effectivity was also investigated. It was observed that a higher amount of foaming agent lowered the density by creating voids in the blend, as expected. The introduction of fillers increases the mechanical properties; however, the density had a negative effect even in the presence of foaming agents. About 3% density reduction can be achieved in the presence of talc and a foaming agent whereas the other fillers had an opposite effect on the density. Accordingly, the impact resistance was affected negatively because of the stiffness of the filler materials, and the highest Izod impact value was 50.2 kJ/m 2 . The elastic modulus values for foamed samples and filled with CaCO 3 , talc, and silica were 808, 681, and 552 MPa respectively. Combining foaming and thermoplastic elastomers (TPEs) offers a wide variety of possibilities to new and existing applications. In addition to low hardness and density, foaming provides better damping ability thanks to its morphological structure.

Chemically foamed thermoplastic elastomer (TPE) material and preparation method thereof

High-Performance Olefin Thermoplastic Elastomer Based on Dynamically Cross-Linking Crystalline Macromers and Elastic Backbones

Synthesis and Characterization of Polyolefin Thermoplastic Elastomers: A Review

Novel halogen-free flame-retardant thermoplastic elastomer material and preparation method thereof

Preparation method for heat-resistant thermoplastic elastomer (TPE) material

Foamed type TPU (thermoplastic polyurethane elastomer) material and preparation method thereof

Effect of Composition on Processing and Mechanical Properties of TPE for Injection Molding Automotive Skin

PP/POE thermoplastic elastomer prepared by dynamic vulcanization and its flame retardant modification

Effect of SEBS Molecular Structure and Formula Composition on the Performance of SEBS/PP TPE for Automotive Interior Skin

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

Fabrication of Enhanced Mechanical Properties and Intrinsic Flame-Retardant Polyurethane Elastomer Containing 4-(Phenylethynyl) Di(Ethylene Glycol) Phthalate

Production and characterization of thermoplastic elastomer foams based on the styrene–ethylene–butylene–styrene (SEBS) rubber and thermoplastic material

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Thermoplastic elastomer composition and a production method thereof

Supercritical carbon dioxide foamed thermoplastic polyester elastomer with poly(lactic acid) blending: shrinkage reduction and expansion ratio improvement

Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Development of thermoplastic polyether ester elastomer microcellular foam with high resilience: Effect of chain extension on foaming behavior and mechanical properties

Environmental benign foam finishing with a hyperbranched polyphosphonate flame retardant for polyethylene terephthalate fabric

Rational design for the development of thermoplastic poly(ether-ester) elastomers from bio-based 2,5-furandicarboxylic acid with high elasticity

Chain extension of thermoplastic polyamide elastomer and its foaming performance