Abstract:Three hardnesses of thermoplastic polyurethane (TPU) foams were prepared by core‐back injection foaming technique to investigate the relationship between hardness and TPU foaming behavior. High hardness TPU has a high viscosity which results in a better foaming quality, thereby obtaining excellent mechanical properties. Although the influence of hard segment content on the foaming behavior of thermoplastic polyurethane (TPU) has been reported in the literature, most of the studies have been limited to batch foaming, and the relationship between hardness on the foaming quality and the surface quality of TPU is still unclear in injection molding foaming. In this study, three hardnesses of TPU foams were prepared by core‐back injection foaming technique to investigate the relationship between hardness and TPU foaming behavior. Firstly, the relationship between hardness and viscosity of TPU was investigated using rotational rheometer. The results showed that the complex viscosity increased with the increase of hardness, especially the viscosity of high hardness TPU responded more significantly at low frequencies. In addition, a scanning electron microscope was used to analyze the cell morphology of TPU foams with different hardness. It was revealed that the cell morphology of 1098A foam with low hardness was deteriorated and deformed severely, with a cell size and cell density of 172.02 μm and 0.59 × 105 cells/cm3, respectively. With the increase of hardness, the cell morphology of high hardness 1071D foam was regular and rounded, its cell size decreased to 95.98 μm and cell density increased 4.43 × 105 cells/cm3. Surface roughness and mechanical experiments showed that the medium hardness 1065D foam had better surface quality and tensile toughness. The elongation at break of the TPU foams decreased with increasing hardness, while the high hardness 1071D foam had better tensile and flexural strength. This study provides understanding for the selection of a suitable hardness to prepare TPU foams with favorable foaming quality and corresponding mechanical properties. Highlights TPU foams of different hardness were prepared using core‐back chemical foaming injection molding technology. High hardness TPU foam had excellent tensile strength and flexural strength.

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

High-strength, Flexible and Cycling-Stable Piezo-Resistive Polymeric Foams Derived from Thermoplastic Polyurethane and Multi-Wall Carbon Nanotubes

Thermoplastic polyurethane/polytetrafluoroethylene composite foams with enhanced mechanical properties and anti-shrinkage capability fabricated with supercritical carbon dioxide

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Foaming behavior of polyamide 1212 elastomers/polyurethane composites with improved melt strength and interfacial compatibility via chain extension

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Green Preparation of Lightweight and Elastic Thermoplastic Polyamide/Polyester Elastomer Composite Foams Using Supercritical CO 2

Enhanced foaming behaviors and compression properties of thermoplastic polyurethane via constructing micro-crosslinking structure assisted by chain extender

Cellular Thermoplastic Polyurethane Thin Film: Preparation, Elasticity, and Thermal Insulation Performance

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

Mechanical Properties of Additively Manufactured Thermoplastic Polyurethane (TPU) Material Affected by Various Processing Parameters

Characterization of Thermoplastic Polyurethane (TPU) and Ag-Carbon Black TPU Nanocomposite for Potential Application in Additive Manufacturing

Effect of the Segmental Structure of Thermoplastic Polyurethane (Hardness) on the Interfacial Adhesion of Textile-Grade Carbon Fiber Composites

Chain extension of thermoplastic polyamide elastomer and its foaming performance

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability

Development of thermoplastic polyether ester elastomer microcellular foam with high resilience: Effect of chain extension on foaming behavior and mechanical properties

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Effect of hardness on the foaming behavior, surface quality, and mechanical properties of thermoplastic polyurethane foams by chemical foaming injection molding

Functional Thermoplastic Polyurethane Elastomers with α, ω-Hydroxyl End-Functionalized Polyacrylates