Abstract:Compression and resilience mechanism of the LCBPP/TPEE/PTFE foam. The reduced permanent strain of the foam and the increased compression strength of the modified LCBPP compared with pure LCBPP foam were attributed to the presence of TPEE and PTFE fibers in the foam. Excellent resilience and compression resistance are the key characteristics of cushioning and water–oil separation materials. Although polypropylene (PP) offers excellent performance and affordability of PP, it exhibits poor resilience. To address this shortcoming, polymer blends with long‐chain branched PP (LCBPP), thermoplastic polyester elastomer (TPEE), and polytetrafluoroethylene (PTFE) were prepared via melt blending, and their mechanical properties were tested. The LCBPP/TPEE/PTFE composites were subjected to physical foaming using supercritical CO2 (scCO2) as the blowing agent. The synergistic toughening mechanism of the elastomer/nanofiber and the effect of the structure and crystallization of the dispersed phase on the foam resilience and foam compression strength were investigated. The results revealed that fibrous PTFE and spherical TPEE formed a composite dispersed phase in LCBPP. The impact and tensile strengths of the unfoamed LCBPP were found to have been simultaneously optimized owing to the synergistic effect of the elastomeric toughening of TPEE and the reinforcement of the PTFE fiber–induced fibrous crystal structure. Compared with pure LCBPP, the impact strength of the LCBPP/TPEE/PTFE composite increased by 216%, whereas its tensile strength decreased by only 6%. In particular, the synergistic effect of TPEE/PTFE improved the resilience and compression strength of the LCBPP foam. Compared with the pure LCBPP foam, the permanent strain of the LCBPP/TPEE/PTFE foam was reduced by 13.8% after five cycles of compression and its compression strength increased by 27.3%. The experimental results of our study could be used to prepare LCBPP foams with exceptional resilience, high compression strength, and good application prospects.

Thermoplastic polyurethane/polytetrafluoroethylene composite foams with enhanced mechanical properties and anti-shrinkage capability fabricated with supercritical carbon dioxide

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

High-strength, Flexible and Cycling-Stable Piezo-Resistive Polymeric Foams Derived from Thermoplastic Polyurethane and Multi-Wall Carbon Nanotubes

Supercritical CO2 Foaming and Shrinkage Resistance of Thermoplastic Polyurethane/modified Magnesium Borate Whisker Composite

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

Enhanced foaming behaviors and compression properties of thermoplastic polyurethane via constructing micro-crosslinking structure assisted by chain extender

Microcellular Thermoplastic Polyurethane (TPU) with Multimodal Cell Structure Fabricated Based on Pressure Swing Strategy and Its Compressive Mechanical Properties

Facile Fabrication of Lightweight Shape Memory Thermoplastic Polyurethane/Polylactide Foams by Supercritical Carbon Dioxide Foaming

Improving the Continuous Microcellular Extrusion Foaming Ability with Supercritical CO2 of Thermoplastic Polyether Ester Elastomer Through In-Situ Fibrillation of Polytetrafluoroethylene.

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability

Green Preparation of Lightweight and Elastic Thermoplastic Polyamide/polyester Elastomer Composite Foams Using Supercritical CO2

Green Preparation of Lightweight and Elastic Thermoplastic Polyamide/Polyester Elastomer Composite Foams Using Supercritical CO 2

Development of High Thermal Insulation and Compressive Strength BPP Foams Using Mold-Opening Foam Injection Molding with In-Situ Fibrillated PTFE Fibers

Preparation of Low Density Microcellular Thermoplastic Polyurethane with High Compression Properties Based on Micro-Phase Separation Structure

Effect of extrusion on the foaming behavior of thermoplastic polyurethane with different hard segments

Effect of Perfluoropolymers on the Anti-Wear Properties of Carbon Fiber/Polyphenylene Sulfide Composites: A Comparative Study

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber

Foaming behavior of polyamide 1212 elastomers/polyurethane composites with improved melt strength and interfacial compatibility via chain extension

Development of in-situ nanofibrillated poly(butylene succinate)/polytetrafluoroethylene composites with elevated rheology, crystallization, and foaming performance

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide