Abstract:Three hardnesses of thermoplastic polyurethane (TPU) foams were prepared by core‐back injection foaming technique to investigate the relationship between hardness and TPU foaming behavior. High hardness TPU has a high viscosity which results in a better foaming quality, thereby obtaining excellent mechanical properties. Although the influence of hard segment content on the foaming behavior of thermoplastic polyurethane (TPU) has been reported in the literature, most of the studies have been limited to batch foaming, and the relationship between hardness on the foaming quality and the surface quality of TPU is still unclear in injection molding foaming. In this study, three hardnesses of TPU foams were prepared by core‐back injection foaming technique to investigate the relationship between hardness and TPU foaming behavior. Firstly, the relationship between hardness and viscosity of TPU was investigated using rotational rheometer. The results showed that the complex viscosity increased with the increase of hardness, especially the viscosity of high hardness TPU responded more significantly at low frequencies. In addition, a scanning electron microscope was used to analyze the cell morphology of TPU foams with different hardness. It was revealed that the cell morphology of 1098A foam with low hardness was deteriorated and deformed severely, with a cell size and cell density of 172.02 μm and 0.59 × 105 cells/cm3, respectively. With the increase of hardness, the cell morphology of high hardness 1071D foam was regular and rounded, its cell size decreased to 95.98 μm and cell density increased 4.43 × 105 cells/cm3. Surface roughness and mechanical experiments showed that the medium hardness 1065D foam had better surface quality and tensile toughness. The elongation at break of the TPU foams decreased with increasing hardness, while the high hardness 1071D foam had better tensile and flexural strength. This study provides understanding for the selection of a suitable hardness to prepare TPU foams with favorable foaming quality and corresponding mechanical properties. Highlights TPU foams of different hardness were prepared using core‐back chemical foaming injection molding technology. High hardness TPU foam had excellent tensile strength and flexural strength.

Effect of extrusion on the foaming behavior of thermoplastic polyurethane with different hard segments

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Effect of hardness on the foaming behavior, surface quality, and mechanical properties of thermoplastic polyurethane foams by chemical foaming injection molding

Enhanced foaming behaviors and compression properties of thermoplastic polyurethane via constructing micro-crosslinking structure assisted by chain extender

Effect of soft segment structure on properties of polyurethane elastomers

Investigation into the effects of foaming variables on the cellular structure and expansion ratio of foamed TPU using response surface methodology

Characterization methods to predict extrusion performance in thermoplastic polyurethane batches

Approach to Fabricating Thermoplastic Polyurethane Blends and Foams with Tunable Properties by Twin‐Screw Extrusion and Microcellular Injection Molding

Thermoplastic polyurethane/polytetrafluoroethylene composite foams with enhanced mechanical properties and anti-shrinkage capability fabricated with supercritical carbon dioxide

Influence of TPU/EVA Phase Morphology Evolution on Supercritical Carbon Dioxide Extrusion Foaming

Supercritical Fluid Microcellular Foaming of High-Hardness TPU via a Pressure-Quenching Process: Restricted Foam Expansion Controlled by Matrix Modulus and Thermal Degradation

Antishrinking Strategy of Microcellular Thermoplastic Polyurethane by Comprehensive Modeling Analysis

Compression Molding of Thermoplastic Polyurethane Foam Sheets with Beads Expanded by Supercritical CO2 Foaming

Fabrication of thermoplastic polyurethane (TPU) / thermoplastic amide elastomer (TPAE) composite foams with supercritical carbon dioxide and their mechanical properties

Effect of Process Parameters on the Hardness of 3D-printed Thermoplastic Polyurethane that Includes Foaming Agent

Tuning High and Low Temperature Foaming Behavior of Linear and Long-Chain Branched Polypropylene via Partial and Complete Melting

Block length distribution, morphology, and property of thermoplastic polyurethanes affected by production method: A polymer‐by‐process investigation

Comparative study of chemical and physical foaming methods for injection-molded thermoplastic polyurethane

Evolution of ordered structure of TPU in high-elastic state and their influences on the autoclave foaming of TPU and inter-bead bonding of expanded TPU beads

Effects of soft segment molecular weight on the properties of recyclable polyurethanes with low‐temperature multiple shape memory

Cellular Thermoplastic Polyurethane Thin Film: Preparation, Elasticity, and Thermal Insulation Performance