Abstract:Compression and resilience mechanism of the LCBPP/TPEE/PTFE foam. The reduced permanent strain of the foam and the increased compression strength of the modified LCBPP compared with pure LCBPP foam were attributed to the presence of TPEE and PTFE fibers in the foam. Excellent resilience and compression resistance are the key characteristics of cushioning and water–oil separation materials. Although polypropylene (PP) offers excellent performance and affordability of PP, it exhibits poor resilience. To address this shortcoming, polymer blends with long‐chain branched PP (LCBPP), thermoplastic polyester elastomer (TPEE), and polytetrafluoroethylene (PTFE) were prepared via melt blending, and their mechanical properties were tested. The LCBPP/TPEE/PTFE composites were subjected to physical foaming using supercritical CO2 (scCO2) as the blowing agent. The synergistic toughening mechanism of the elastomer/nanofiber and the effect of the structure and crystallization of the dispersed phase on the foam resilience and foam compression strength were investigated. The results revealed that fibrous PTFE and spherical TPEE formed a composite dispersed phase in LCBPP. The impact and tensile strengths of the unfoamed LCBPP were found to have been simultaneously optimized owing to the synergistic effect of the elastomeric toughening of TPEE and the reinforcement of the PTFE fiber–induced fibrous crystal structure. Compared with pure LCBPP, the impact strength of the LCBPP/TPEE/PTFE composite increased by 216%, whereas its tensile strength decreased by only 6%. In particular, the synergistic effect of TPEE/PTFE improved the resilience and compression strength of the LCBPP foam. Compared with the pure LCBPP foam, the permanent strain of the LCBPP/TPEE/PTFE foam was reduced by 13.8% after five cycles of compression and its compression strength increased by 27.3%. The experimental results of our study could be used to prepare LCBPP foams with exceptional resilience, high compression strength, and good application prospects.

Synergistic effects of in situ fibrillated polytetrafluoroethylene and polystyrene–butadiene block on the microcellular foaming behaviors of polyphenylene oxide modified by high‐impact polystyrene

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Influences of high‐impact polystyrene loading on the foaming behavior and flame‐retardant properties of polyphenylene oxide composites blown with CO 2

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

Enhancing the foaming properties of polypropylene/basalt fiber composites by altering their rheological and crystallization behavior via polyethylene–octene blending modification

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

Study on the Foaming Behaviors of PBS and Its Modification with PA6IcoT Assisted by scCO 2

Structural Optimization of Polyimide Foam via Composition with Hyperbranched Polymer Modified Fluorinated Carbon Nanotubes

The Cellular Structure and Toughness of Hydrogenated Styrene-Butadiene Block Copolymer Reinforced Polypropylene Foams

Study on foaming behavior of block copolymer/inorganic particles co‐construction of toughened epoxy resin foams

In Situ Nanofibrillar Polypropylene-Based Composite Microcellular Foams with Enhanced Mechanical and Flame-Retardant Performances

Enhanced Foaming Behavior of Ultrahigh Molecular Weight Polyethylene by Blending Silicone Powder in Microcellular Foaming

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

Preparation and properties of PP/SEBS foam materials

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2

Foaming Behaviors of Poly (butylene Adipate-Co-terephthalate) with Methyl Methacrylate-Co-glycidyl Methacrylate As Chain Extender

Achieving super-tough high-density polyethylene with promising foamability using silane crosslinked polyolefin elastomer nanofibrils network

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide

A novel in-situ fibrillation enhancement strategy to achieve super-elastic green foam with enhanced biodegradation

Strategy for the Preparation of PBAT/Starch Blended Foam with High Resilience and Shrinkage Resistance