Abstract:As a substitute for conventional polymers for the preparation of biodegradable microcellular polymeric foams, polybutylene succinate (PBS) presents one of the most promising alternatives. However, the low melt strength of PBS makes it difficult to produce high-performance microcellular foams. This study aimed to improve the melt strength of PBS and explore the mechanical, thermal, crystalline, rheological, and supercritical CO2 foaming properties of PBS nanocomposites by using carbon nanofibers (CNFs). This study found that nanocomposites containing 7 wt% CNF exhibited the highest tensile strength, Young's modulus, and bending strength. Moreover, the CNF nanofillers were well dispersed in the PBS matrix without significant agglomeration, even at high filler concentrations. Furthermore, the nanocomposites demonstrated improved melting temperature and crystallinity compared with pure PBS. The rheological analysis showed that the addition of CNFs significantly increased PBS viscosity at low frequencies due to the interaction between the PBS molecular chains and CNFs and the entanglement of CNFs, resulting in a more complete physical network formation when the CNF content reached above 3 wt%. During the supercritical CO2 foaming process, the addition of CNFs resulted in increased cell density, smaller cells, and thicker cell walls, with good laps formed between the fibers on the cell walls of nanocomposite foams. Moreover, the electrical conductivity and electromagnetic interference (EMI) shielding properties of the foamed material were studied, and a nanocomposite foam containing 7 wt% CNF showed good electrical conductivity (4.5 × 10−3 S/m) and specific EMI shielding effectiveness (EMI SE) (34.7 dB/g·cm−1). Additionally, the nanocomposite foam with 7 wt% CNF also exhibited good compression properties (21.7 MPa). Overall, this work has successfully developed a high-performance, multifunctional PBS-based nanocomposite foam, making it suitable for applications in various fields.

Study on the Foaming Behaviors of PBS and Its Modification with PA6IcoT Assisted by scCO 2

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Study on ester-amide exchange reaction between PBS and PA6IcoT

Crystallization Behavior of Reactive Blends Between Pbs and Pa6icot

The Essential Role of PBS on PBAT Foaming under Supercritical CO2 Toward Green Engineering

Mechanical, Crystallization, Rheological, and Supercritical CO2 Foaming Properties of Polybutylene Succinate Nanocomposites: Impact of Carbon Nanofiber Content

Low-shrinkage Biodegradable PBST/PBS Foams Fabricated by Microcellular Foaming Using CO2 & N2 As Co-Blowing Agents

Preparation of Enhanced Poly(Butylene Succinate) Foams

Rheological Properties and Foam Preparation of Biodegradable Poly(butylene Succinate)

Effect of Poly(butylenes Succinate) on Poly(lactic Acid) Foaming Behavior: Formation of Open Cell Structure

Development of in-situ nanofibrillated poly(butylene succinate)/polytetrafluoroethylene composites with elevated rheology, crystallization, and foaming performance

In-depth investigation of how carbon nanofiller dispersion affects microcellular foaming behavior in poly(butylene succinate) nanocomposites

Effect of Crosslinking Agent and Branching Agent on Morphological and Physical Properties of Poly(Butylene succinate) Foams

Engineering of Polybutylene Succinate with Long-Chain Branching Toward High Foamability and Degradation

Review on poly (butylene succinate) foams: Modifications, foaming behaviors and applications

Fabrication of Poly(butylene succinate)/Carbon Black Nanocomposite Foams with Good Electrical Conductivity and High Strength by a Supercritical CO2 Foaming Process

Synergistic effects of in situ fibrillated polytetrafluoroethylene and polystyrene–butadiene block on the microcellular foaming behaviors of polyphenylene oxide modified by high‐impact polystyrene

Fabrication and Characterization of PLA/PBAT Blends, Blend-Based Nanocomposites, and Their Supercritical Carbon Dioxide-Induced Foams

Influence of Polylactide (PLA) Stereocomplexation on the Microstructure of PLA/PBS Blends and the Cell Morphology of Their Microcellular Foams

Ultrasound and H2O assisted scCO2 foaming technology for preparation of PS/PMMA composite foams with ultra-lightweight and super thermal-insulation

Preparation and Characterization of Poly(butylene Succinate-Co-adipate)/poly(lactic Acid) Blends with Enhanced Compatibility, Mechanical Properties, and Heat Resistance