Abstract:As a substitute for conventional polymers for the preparation of biodegradable microcellular polymeric foams, polybutylene succinate (PBS) presents one of the most promising alternatives. However, the low melt strength of PBS makes it difficult to produce high-performance microcellular foams. This study aimed to improve the melt strength of PBS and explore the mechanical, thermal, crystalline, rheological, and supercritical CO2 foaming properties of PBS nanocomposites by using carbon nanofibers (CNFs). This study found that nanocomposites containing 7 wt% CNF exhibited the highest tensile strength, Young's modulus, and bending strength. Moreover, the CNF nanofillers were well dispersed in the PBS matrix without significant agglomeration, even at high filler concentrations. Furthermore, the nanocomposites demonstrated improved melting temperature and crystallinity compared with pure PBS. The rheological analysis showed that the addition of CNFs significantly increased PBS viscosity at low frequencies due to the interaction between the PBS molecular chains and CNFs and the entanglement of CNFs, resulting in a more complete physical network formation when the CNF content reached above 3 wt%. During the supercritical CO2 foaming process, the addition of CNFs resulted in increased cell density, smaller cells, and thicker cell walls, with good laps formed between the fibers on the cell walls of nanocomposite foams. Moreover, the electrical conductivity and electromagnetic interference (EMI) shielding properties of the foamed material were studied, and a nanocomposite foam containing 7 wt% CNF showed good electrical conductivity (4.5 × 10−3 S/m) and specific EMI shielding effectiveness (EMI SE) (34.7 dB/g·cm−1). Additionally, the nanocomposite foam with 7 wt% CNF also exhibited good compression properties (21.7 MPa). Overall, this work has successfully developed a high-performance, multifunctional PBS-based nanocomposite foam, making it suitable for applications in various fields.

Effect of Poly(butylenes Succinate) on Poly(lactic Acid) Foaming Behavior: Formation of Open Cell Structure

Study on the Foaming Behaviors of PBS and its Modification with PA6IcoT Assisted by scCO2

Engineering of Polybutylene Succinate with Long-Chain Branching Toward High Foamability and Degradation

Fractionated Crystallization, Polymorphic Crystalline Structure, and Spherulite Morphology of Poly(butylene Adipate) in Its Miscible Blend with Poly(butylene Succinate)

Influence of Polylactide (PLA) Stereocomplexation on the Microstructure of PLA/PBS Blends and the Cell Morphology of Their Microcellular Foams

Preparation of Enhanced Poly(Butylene Succinate) Foams

Rheological Properties and Foam Preparation of Biodegradable Poly(butylene Succinate)

Effect of Processing Conditions on Poly(butylene Succinate) Foam Materials

Preparation of Biodegradable PBST/PLA Microcellular Foams under Supercritical CO2: Heterogeneous Nucleation and Anti-Shrinkage Effect of PLA

Low-shrinkage Biodegradable PBST/PBS Foams Fabricated by Microcellular Foaming Using CO2 & N2 As Co-Blowing Agents

Mechanical, Crystallization, Rheological, and Supercritical CO2 Foaming Properties of Polybutylene Succinate Nanocomposites: Impact of Carbon Nanofiber Content

Study on the Foaming Behaviors of PBS and Its Modification with PA6IcoT Assisted by scCO 2

Review on poly (butylene succinate) foams: Modifications, foaming behaviors and applications

The Essential Role of PBS on PBAT Foaming under Supercritical CO2 Toward Green Engineering

Effect of Crosslinking Agent and Branching Agent on Morphological and Physical Properties of Poly(Butylene succinate) Foams

Effect of Polybutylene Succinate Additive in Polylactic Acid Blend Fibers via a Melt-Blown Process

Biodegradable Composites of Poly(butylene Succinate‐co‐butylene Adipate) Reinforced by Poly(lactic Acid) Fibers

Effects of Polybutylene Succinate Content on the Rheological Properties of Polylactic Acid/Polybutylene Succinate Blends and the Characteristics of Their Fibers

Effect of Poly(Ethylene Glycol) on the Properties and Foaming Behavior of Macroporous Poly(Lactic Acid)/Sodium Chloride Scaffold

Research on Poly(lactic acid)/Poly(butylenes succinate) Blends

Preparation and Characterization of Poly(butylene Succinate-Co-adipate)/poly(lactic Acid) Blends with Enhanced Compatibility, Mechanical Properties, and Heat Resistance