Abstract:Compression and resilience mechanism of the LCBPP/TPEE/PTFE foam. The reduced permanent strain of the foam and the increased compression strength of the modified LCBPP compared with pure LCBPP foam were attributed to the presence of TPEE and PTFE fibers in the foam. Excellent resilience and compression resistance are the key characteristics of cushioning and water–oil separation materials. Although polypropylene (PP) offers excellent performance and affordability of PP, it exhibits poor resilience. To address this shortcoming, polymer blends with long‐chain branched PP (LCBPP), thermoplastic polyester elastomer (TPEE), and polytetrafluoroethylene (PTFE) were prepared via melt blending, and their mechanical properties were tested. The LCBPP/TPEE/PTFE composites were subjected to physical foaming using supercritical CO2 (scCO2) as the blowing agent. The synergistic toughening mechanism of the elastomer/nanofiber and the effect of the structure and crystallization of the dispersed phase on the foam resilience and foam compression strength were investigated. The results revealed that fibrous PTFE and spherical TPEE formed a composite dispersed phase in LCBPP. The impact and tensile strengths of the unfoamed LCBPP were found to have been simultaneously optimized owing to the synergistic effect of the elastomeric toughening of TPEE and the reinforcement of the PTFE fiber–induced fibrous crystal structure. Compared with pure LCBPP, the impact strength of the LCBPP/TPEE/PTFE composite increased by 216%, whereas its tensile strength decreased by only 6%. In particular, the synergistic effect of TPEE/PTFE improved the resilience and compression strength of the LCBPP foam. Compared with the pure LCBPP foam, the permanent strain of the LCBPP/TPEE/PTFE foam was reduced by 13.8% after five cycles of compression and its compression strength increased by 27.3%. The experimental results of our study could be used to prepare LCBPP foams with exceptional resilience, high compression strength, and good application prospects.

Supercritical carbon dioxide foamed thermoplastic polyester elastomer with poly(lactic acid) blending: shrinkage reduction and expansion ratio improvement

Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly

Super‐Elastic and Dimensionally Stable Polyether Block Amide Foams Fabricated by Microcellular Foaming with CO2&N2 as Co‐Blowing Agents

Green Preparation of Lightweight and Elastic Thermoplastic Polyamide/Polyester Elastomer Composite Foams Using Supercritical CO 2

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Structure-tunable polyether block amide/polylactic acid foams with shape memory performance using supercritical CO 2 foaming

Effect of calcium silicate on foaming and anti‐shrinkage behavior of thermoplastic polyamide elastomers: Revelation of the open‐cell mechanism

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability

Development of thermoplastic polyether ester elastomer microcellular foam with high resilience: Effect of chain extension on foaming behavior and mechanical properties

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization

Microcellular Injection Molded Polylactic Acid/poly (Ε-Caprolactone) Blends with Supercritical CO2: Correlation Between Rheological Properties and Their Foaming Behavior

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Biodegradable and Ultra-High Expansion Ratio PPC-P Foams Achieved by Microcellular Foaming Using CO2 as Blowing Agent

Chain extension of thermoplastic polyamide elastomer and its foaming performance

Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

Influence of TPU/EVA Phase Morphology Evolution on Supercritical Carbon Dioxide Extrusion Foaming

Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)