Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

Supercritical carbon dioxide foamed thermoplastic polyester elastomer with poly(lactic acid) blending: shrinkage reduction and expansion ratio improvement

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

High-expansion-ratio PLLA/PDLA/HNT composite foams with good thermally insulating property and enhanced compression performance via supercritical CO2

Cellulose nanofibers enabled strong and flexible plant-derived thermoplastic polyester elastomer foams for high-performance thermally insulating applications

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

Synergistic effect of thermoplastic polyester elastomer and polytetrafluoroethylene in situ fibrillation on the resilience and compression strength of long‐chain branched polypropylene foam

A Facile and Clean Strategy to Manufacture Functional Polylactic acid Bead Foams

MMT‐St and PLA synergistically enhanced the microcellular of TPU foam and improved its dimensional stability

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)

Cellular Thermoplastic Polyurethane Thin Film: Preparation, Elasticity, and Thermal Insulation Performance

Super‐Elastic and Dimensionally Stable Polyether Block Amide Foams Fabricated by Microcellular Foaming with CO2&N2 as Co‐Blowing Agents

Enhancing Foamability and Flame‐retardancy of Polylactic Acid Bead Foams Through Inter‐beads Bulk Polymerization and Continuous Phase Dispersion of LDHs

Tpu/Pla Blend Foams: Enhanced Foamability, Structural Stability, And Implications For Shape Memory Foams

Green Preparation of Lightweight and Elastic Thermoplastic Polyamide/Polyester Elastomer Composite Foams Using Supercritical CO 2

Regulating cell morphology of poly (lactic acid) foams from microcellular to nanocellular by crystal nucleating agent

Structure-tunable polyether block amide/polylactic acid foams with shape memory performance using supercritical CO 2 foaming

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization