Abstract:Developing poly(lactic acid) (PLA)-based biodegradable polymer foams with high performance is crucial for sustainable energy conservation and the ecological environment. In this work, by applying poly(lactide-co-caprolactone) (PLCL) as a compatibilizer, the block polymer of poly(l-lactic) acid (PLLA)-b-polycaprolactone (PCL) with a long-chain branched structure was prepared by reactive processing. By utilizing the difference between the glass-transition temperature (T g) and melting temperature (T m) of PLA and PCL, PLLA-b-PCL-PLCL foams with a PCL chain as the foaming phase and an oriented PLLA chain as the enhancing phase were prepared by establishing a solid-phase hot drawing@supercritical CO2 foaming method. The incorporation of PLCL links significantly improved the interfacial compatibility between PLLA and PCL phases and chain entanglements, exhibiting strain-hardening behavior and leading to an improvement in the stretchability of the block polymer. In the hot drawing process in the range of T g(PLA)–T m(PLA), both PLLA and PCL phases were elongated along the drawing direction, and with an increasing draw ratio, the orientation factor and the crystallinity of the two phases increased evidently, accompanied by the formation of a shish–kebab crystalline structure. In the subsequent foaming process in the range of T g(PCL)–T m(PCL), the molecular chains of the PLLA phase were frozen and the retention of the orientation factor reached over 90%, while under CO2, crystallinity and crystallite size increased and a more perfect crystalline structure formed for the PCL phase. With an increasing draw ratio, the saturated dissolved amount of CO2 increased and the cell density and cell size of foam reached 5.13 × 109 cells/cm3 and 4.06 μm, respectively. The fibrillar structures of the PLLA phase appeared on the cell wall, while the tensile strength and modulus of foam reached as high as 65.9 MPa and 1.01 GPa, respectively. As a result, a super-strong PLA-based microcellular foam with dense micropores and highly oriented microfibrillar structures was constructed.

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Construction of a Highly Oriented Poly(lactic acid)-Based Block Polymer Foam and Its Self-Reinforcing Mechanism

Super toughened blends of poly(lactic acid) and poly(butylene adipate- co -terephthalate) injection-molded foams via enhancing interfacial compatibility and cellular structure

Fabrication of poly(lactic acid) foam with high expansion ratio and oriented cellular structure by restricting cold crystallization

Multi-Response Optimization and Cell Structure-Property Relationships of Polylactide (PLA) Foams

A Facile and Clean Strategy to Manufacture Functional Polylactic acid Bead Foams

Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly

Flexibly Controlling the Polycrystallinity and Improving the Foaming Behavior of Polylactic Acid via Three Strategies

Preparation of poly(lactic acid) with excellent comprehensive properties via simple deformation or microfibrillation of spherulites

Effect of Stereocomplexation on High-temperature Microcellular Foaming Behaviour, Compressive Property and Heat Resistance of Branched Poly(l-lactide)/poly(d-lactide)

Simultaneous strengthening and toughening of PLA with full recyclability enabled by resin-microsphere-modified L-lactide oligomers

Extruded polylactide bead foams using anhydrous supercritical CO2 extrusion foaming

A Simple, Low-Cost, and Green Method for Preparing Strong, Tough, and Ductile Poly(lactic acid) Materials with Good Transparency and Heat Resistance

Polylactic Acid Chemical Foaming Assisted by Solid-State Processing: Solid-State Shear Pulverization and Cryogenic Milling

High-expansion-ratio PLLA/PDLA/HNT composite foams with good thermally insulating property and enhanced compression performance via supercritical CO2

Fabrication of biodegradable poly (lactic acid)/carbon nanotube nanocomposite foams: Significant improvement on rheological property and foamability

Influence of Polylactide (PLA) Stereocomplexation on the Microstructure of PLA/PBS Blends and the Cell Morphology of Their Microcellular Foams

The synergistic effect of polytetrafluoroethylene in-situ fibrillation and dibenzoyl sebacate hydrazide on the crystallization and foaming behavior of poly (lactic acid)

A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites

Mild Fabrication of Polymeric Porous/Nonporous Micro‐Composite Structures via Enhancing the Photothermal Conversion of Ultrafast Laser