Abstract:Thermal shrinkage has for long been a critical issue in nonwoven industrial applications. A dimensionally stable nonwoven web with excellent mechanical property was achieved by heat treatment with tension [taut annealed (TA)] instead of annealing under free state [free annealed (FA)], while the original high porosity was not affected. To better understand the fundamental structure-property relationship, these two different heat treatments' effects on the thermal behaviors, morphology, and phase structures of poly(phenylene sulfide) (PPS) nonwovens were elucidated via a combination of different experimental techniques such as temperature-modulated differential scanning calorimetry (DSC), two-dimensional wide-angle X-ray diffraction, two-dimensional small-angle X-ray scattering, and polarized Raman spectroscopy. It is evidenced that no obvious online stress-induced crystallization occurs during the melt-blowing process, making virgin PPS fibers mostly in the amorphous state. However, experimental results confirm that a certain amount of mesophase or constrained amorphous exists in the virgin PPS fibers without any presence of crystallites. After annealing, the DSC melting curves of both TA and FA PPS nonwovens exhibit endothermic annealing peaks, the origin of which is interpreted as the relaxation and devitrification of the rigid amorphous phase. However, the annealing peak position of the FA sample is always higher than that of the TA sample, which is reported for the first time. As compared with the FA sample annealed at the same temperature, TA PPS nonwovens reveal lower crystallinity and slightly larger lamellar long period (L-p) but a higher level of macroscopic fiber alignment and molecular chain orientation. These morphology and microstructure differences provide a good explanation for the superior mechanical property of TA PPS nonwovens with higher elastic modulus and tensile strength. The results are helpful in deepening the understanding of essential physical pictures of PPS nonwovens and promoting the development of the high-temperature nonwoven industry.

Study on Structure and Property of PP/TPU Melt-Blown Nonwovens

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Phase Morphology and Mechanical Properties of the Electrospun Polyoxymethylene/polyurethane Blend Fiber Mats

Improving the Compatibility of Biodegradable Poly (Lactic Acid) Toughening with Thermoplastic Polyurethane (TPU) and Compatibilized Meltblown Nonwoven

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Study on the Processing Technology and Mechanical Properties of Nonwoven Fabric Composited by Recycled PP Selvedges

Properties And Crystallization Behavior Of Poly (Vinylidene Fluoride) (Pvdf)/Thermoplastic Polyurethane Elastomer (Tpu) Blends

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

Fabrication and piezoresistive property of TPU/MWNTs oriented nanofibers

Study on thermoplastic polyurethane/montmorillonite nanocomposites

Morphology and properties of high molecular weight polyisobutylene and thermoplastic polyurethane elastomer

Effect of Morphology Development on the Low‐temperature Tensile Properties of PP / POE Blends

Study on blends of thermoplastic polyurethane and aliphatic polyester: morphology, rheology, and properties as moisture vapor permeable films

Heat-setting Effect on the Morphology and Phase Structures of PPS Nonwovens

Study of Nanocomposites Prepared by Melt Blending Tpu and Montmorillonite

Morphology and Mechanical Properties of Blends of Thermoplastic Polyurethane and Polyolefins

Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing

Improvement of Mechanical Property for PLA/TPU Blend by Adding PLA-TPU Copolymers Prepared via In Situ Ring-Opening Polymerization

Investigation of Crystallization, Morphology, and Mechanical Properties of Polypropylene/Polypropylene-Polyethylene Block Copolymer Blends

Preparation and Characteristic of PC/PLA/TPU Blends by Reactive Extrusion