Abstract:A novel two‐step joining method was developed to join alumina ceramics for high‐temperature applications. Firstly, alumina ceramics were bonded using Al2O3 powder at 1550°C. Subsequently, the Dy2O3‐Al2O3‐SiO2 glass was infiltrated into the interlayer at 1450°C to obtain the alumina/alumina joints with dense composite interlayer composed by Al2O3, Dy2Si2O7, and few glass phase. The flexural strength of the joints at 1000°C reached about 90% of that of alumina ceramics under the same conditions. After the thermal cycles from room temperature to 1000°C for 50 times, there was no significant change in the flexural strength of the joints. In this work, a novel two‐step joining method was developed to join alumina ceramics for high‐temperature applications. First, alumina ceramics were bonded using Al2O3 powder at 1550°C. Subsequently, the Dy2O3–Al2O3–SiO2 glass was infiltrated into the interlayer at 1450°C to obtain the alumina/alumina joints with dense composite interlayer composed by Al2O3, Dy2Si2O7, and few glass phase. The content of Al2O3 in the composite interlayer reached 52.7%. As a result, the coefficient of thermal expansion mismatch between the interlayer and the alumina ceramic was reduced to only 2%. The flexural strength of the joints at room temperature was equivalent to that of the alumina ceramic. Furthermore, the flexural strength of the joints at 1000°C reached about 90% of that of alumina ceramics under the same conditions. After the thermal cycles from room temperature to 1000°C for 50 times, there was no significant change in the flexural strength of the joints.

Joining of Al2O3 Ceramics at Low Temperature

Crystallization and Wetting Behavior of Bismuth–borate–zinc Glass and Its Application in Low Temperature Joining Alumina Ceramics

Joining ZTA Ceramics by Using Whiskers Reinforced Borosilicate Glasses for High-Temperature Applications

Microstructure and Strength of Al2o3/Al2o3 Joints Bonded with Zno-Al2o3-B2o3-Sio2 Glass-Ceramic

Microwave Joining Alumina Ceramics Using Al-Si Alloy Powders at Low Temperature

Novel two‐step method for joining alumina ceramic by using Al2O3 powder followed by glass infiltration

Joining of Al 2 O 3 by epitaxial growth of aluminum borate whiskers for high-temperature applications

Progress in Joining of Alumina Ceramics to Metal

The brazing of Al2O3 ceramic and other materials

The Influence of Alumina to Microstructure and Dielectric Properties for Low Temperature Co-Fired Ceramics

Joining Dense Si3N4 to Porous Si3N4 Using a Novel Glass-Ceramic Interlayer with Precipitated Β-Lialsi2o6/mg2sio4

Low-temperature Brazing of Alumina Ceramics with Bismuth-Borate Glass in Air

Low-temperature Ultrasound-Activated Joining of ZrO2 Ceramics Using Sn-Al-Cu Solder

Joining AlN ceramics by ZnO–Al2O3–B2O3–SiO2 (ZABS) glass-ceramic at low temperature

Realizing the Air Joining of ZrO2 Ceramics Through Al Metal

Preparation of High Purity Alumina Ceramic Supports at Low Temperature

Alumina ceramics joined with screen-printed B2O3 by spark plasma sintering

The Authors Declare that They Have No Known Competing Financial Interests or Personal Relationships that Could Have Appeared to Influence the Work Reported in this Paper

Microstructure and Enhanced Magnetic Properties of Low-Temperature Sintered LiZnTiMn Ferrite Ceramics with Bi2O3-Al2O3 Additive

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Microstructure Evolution and Bonding Mechanism of ZrO2 Ceramic and Ti-6Al-4V Alloy Joints Brazed by Bi2O3-B2O3-ZnO Glass Paste