Abstract:This study presents research into the unique method of depositing carbon layers onto processed surfaces, during finishing with abrasive films, on a global basis. The authors of this article are holders of the patent for this method. What makes this technology outstanding is that it integrates processes, whereby micro-finishing and the deposition of a carbon layer onto freshly exposed surface fragments is achieved simultaneously, in a single process. Among the main advantages accruable from this process is the reduction of surface irregularities, while the deposition of a carbon layer is achieved simultaneously. Ultrathin graphite layers can be widely used in conditions where other methods of reducing the coefficient of friction are not possible, such as in regard to micromechanisms. This article illustrates the application of carbon coating, end on, on a surface processed with abrasive film, containing intergranular spaces, saturated with graphite. Thin carbon layers were obtained on two substrates that did not contain carbon in their initial composition: soda–lime glass and a tin–bronze alloy. It was performed through microscopic examinations of the produced surface, roughness analyses of these surfaces, and analysis of the chemical compositions determined by two methods, namely EDS and GDOES, proving the existence of the coatings. The aim of this paper is to prove the possibility and efficiency of using graphite-impregnated lapping films in the deposition process of carbon films, with improved surface smoothness, durability, and wear resistance. The produced coatings will be tested in regard to their operational properties in further research. The authors underline the potential of this method to revolutionize surface treatment processes, due to the significant advantages it offers across various industries.

Ultrafine Grinding and Surface Modification of Powders by Impinging Stream Ethod

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

Wet mechanochemical surface modification of calcite employing an integration of conventional design and analytical hierarchy process

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Mechanism of surface hydrophobicity modification of wollastonite powder

Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process

Surface Modification Mechanism of Stearic Acid to Zirconia Powders Induced by Ball Milling for Water-Based Injection Molding

Surface Modification of Alumina Powder Particles Through Stearic Acid for the Fabrication of Translucent Alumina Ceramics by Injection Molding

Study on preparation and surface modification of precipitated silica obtained from fly ash

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process

Surface modification of nanosized biphasic alpha-TCP/HA powders

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Surface coating of anhydrite powders with CaCO3 nano-particles prepared in Ca(OH)2-H2O-CO2 system

Effect of Stearic Acid on Aggregates in Process of Preparation of Ultrafine α-Al2O3 Powders

Surface Modification of Natural Fibrous Brucite with Stearic Acid

Anti-Fouling Behaviors of a Modified Surface Induced by an Ultrasonic Surface Rolling Process for 304 Stainless Steel

Surface Modification of Nanosized Biphasic α-TCP/HA Powders

Ultrathin Carbon Textures Produced on Machined Surfaces in an Integrated Finishing Process Using Microabrasive Films

New Process of Fine Grinding-Activation of Heavy CaCO 3 and Its Application to PVC Rigid Sheet

Sustainable micro-manufacturing of superhydrophobic surface on ultrafine-grained pure aluminum substrate combining micro-embossing and surface modification